Checking For Open Zones - ADEMCO Vista AT User Manual

CHECKING FOR OPEN ZONES
w
tiel%l
FAULT 05 FRONT
PSTAIRS BEDROOM
izldb~
---
Lz3Gtfm
= 0"""'" "-"
-II
\
d
b
1
BEFORE ARMING YOUR ALARM SYSTEM, ALL PROTECTED DOORS,
WINDOWS AND OTHER PROTECTION ZONES MUST BE CLOSED.
1. If the following display is present prior to arming, check
2. All open protection zones will be displayed.
for open zones by depressing the READY key.
3. The following will be displayed when all protection
m
zones have been made intact or corrected.
-
NOTE: All
or
part of the above message maybe dis-
placed by an alternative customized message
programmed by the installer. Bear this in mind
whenever the instructions in this section of the
27
manual indicate that the "Disarmed" message
above will be displayed.