CHECKING FOR OPEN ZONES
Using the [ ] READY Key
TYPICAL DISPLAYS
WHEN READY NOT TO ARM
(-7%61)( 46)77
83 7,3; *%9087
– 14 –
www.PDF-Zoo.com
Before arming your system, all protected doors, windows, and other
protection zones not on the exit route must be closed or bypassed (see
BYPASSING PROTECTION ZONES section). If zones are open, the keypad
will display a "NOT READY" message, and if your keypad has a READY
indicator light, it will not be lit. The READY [ ] key can be used to display
all faulted zones, making it easier for you to secure any open zone.
To display faulted zones, simply press and release the READY [ ] key (do
not enter code first).
Secure or bypass the zones displayed before arming the system.
When all protection zones have been either closed or bypassed, "READY"
message will be displayed and the keypad's READY indicator light (if
present) will be lit. The system can be armed if the zones that are NOT
READY are on the exit route.
To display open zones, press the [ ] key.
INDICATING OPEN PROTECTION ZONE
ALPHA
AC
NOT READY
FIXED-WORD
TYPICAL DISPLAYS
(After Pressing Ready Key)
*%908
*6328 &)(6331
ALPHA
AC
NOT READY
FIXED-WORD
TYPICAL DISPLAYS
INDICATING "READY TO ARM"
(-7%61)(
6)%(= 83 %61
ALPHA
AC
READY
FIXED-WORD