Planar E2c Display User Manual page 22

Dome E2c Specification
In locations where 240V outlets are used, connect the Dome E2c display only to a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category Characteristic Item
Screen Screen size diagonal
Native resolution
Colors supported
Refresh rate
Contrast ratio
Brightness
Viewing angle
Interface Digital Video In
Analog Video In
Display control, brightness/contrast
Display identification
USB hub
Display status
Input Formats Landscape orientation
Portrait orientation
VGA/SVGA/XGA/SXGA
S-Video & Composite modes
Screen type
Physical Display size (without stand)
Display weight (without stand)
Mounting options
Power Input voltage
Requirements
Power consumption
12 | Dome E2c Display
Specification
541 mm (21.3 in.)
1200 x 1600 pixels (portrait & landscape)
16M colors, 24 bit
60 Hz
900:1 (typical)
2
500 cd/m minimum
178° (± 89°) horizontal/vertical
DVI-D Rev. 1.0 single-channel connector
DVI-A or VGA; S-Video, Composite Video
DDC2B+
EDID 1.3 read using DDC2B+
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Bicolor LED on connector plate
1600 x 1200
1200 x 1600
640 x 480 to 1280 x 1024 displayed in both
landscape and portrait rotations
NTSC, PAL, SOG
AMLCD (active matrix liquid crystal display)
483 mm x 375 mm x 112 mm
(19.0 in. x 14.8 in. x 4.4 in.)
5.44 kg (12 lb)
Desktop stand with integrated USB hub (standard);
100-mm VESA mounting (optional)
+12 V ±5%
120 Watts maximum