Planar E2c Display User Manual page 17

Planar systems user's guide lcd flat panel tv e2c display

Hide thumbs Also See for E2c Display:

Table of Contents

Connect the Video and Power Cables

Use only the power adapter (Ault MW122KA1223F52), power cord,

and the video cable shipped with the Dome E2c display.

To connect the cables

1 Plug one end of the DVI cable into the DVI port on the connector

plate. Secure the connection.

2 Plug the power cord into the power input port on the plate.

3 Plug the other end of the DVI cable into the video port on the

installed display controller. Secure the connection. (Use Video 1

port for the first display of a dual setup or for a single display.)

4 Plug the other end of the power cord into the power adapter, and

then connect the power adapter to a grounded AC outlet.

5 Repeat steps 1 to 4 to connect a second display to the controller.

6 Power on the display first, then the computer.

Installing the Display | 7

Table of Contents