Planar E2c Display User Manual page 14

4 | Dome E2c Display
Desk Stand Features
Unfasten the stand lock to adjust display height. Remove the stand
cover to thread the power cord and DVI cable connections to the
display. To activate the USB hub function, the display must be
connected to a USB-compliant computer or another hub with a USB
cable. Even if the display is in power-saving mode, the USB devices
function when connected to the USB ports of the display.
Stand height lock
Stand cable cover
USB hub
Move the stand lock lever to
the left to adjust the height of
the display.
Press the PUSH button at the
bottom of the desk stand and
pull the stand cable cover
down and out to remove it.
Use the integrated, bus-
powered USB hub to attach
USB devices to the display
rather than to the computer.