Fan Connectors; Table 32. Multiport Sas/Sata Connector Pin-Out - Intel S1400SP Technical Manual

On-board Connector/Header Overview
transfer rates of up to 3Gb/s. The connector labeled "SCU_1" is only enabled when an optional
8-port SAS or SATA Intel
of supported storage upgrade keys.
"SATA_2-5" connector supports up to four SATA ports capable of transfer rates of up to 3Gb/s.
The following tables provide the pin-out for each connector.
Signal Description
GROUND
SAS0_RX_C_DP
SAS0_RX_C_DN
GROUND
SAS1_RX_C_DP
SAS1_RX_C_DN
GROUND
TP_SAS1_BACKPLANE_TYPE
GROUND
SGPIO_SAS1_DATAOUT
SGPIO_SAS1_DATAIN
GROUND
SAS2_RX_C_DP
SAS2_RX_C_DN
GROUND
SAS3_RX_C_DP
SAS3_RX_C_DN
GROUND
GROUND
GROUND
GROUND
GROUND
8.5

Fan Connectors

The server board provides two SSI-compliant 4-pin and five 10-pin fan headers to use as CPU
and I/O cooling fans. Each connector is monitored and controlled by on-board platform
management.
The following table provides the pin-out for all fan connectors.
 One 4-pin fan header is designated as processor cooling fans:
o CPU FAN
One 4-pin fan header is designated as rear system fan:

o SYS FAN_6
 Five 10-pin fan headers are designated as redundant system fans:
o SYS FAN_1
o SYS FAN_2
o SYS FAN_3
o SYS FAN_4
o SYS FAN_5
86
®
RAID C600 Upgrade Key is installed. See Table 7 for a complete list

Table 32. Multiport SAS/SATA Connector Pin-out

Pin#
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
MTH1
MTH2
MTH3
MTH4
Intel order number G64248-003
Intel® Server Board S1400SP TPS
Pin# Signal Description
B1
B2 SAS0_TX_C_DP
B3 SAS0_TX_C_DN
B4
B5 SAS1_TX_C_DP
B6 SAS1_TX_C_DN
B7
B8 SGPIO_SAS1_CLOCK
B9 SGPIO_SAS1_LOAD
B10
B11 PD_SAS1_CONTROLLER_TYPE
B12
B13 SAS2_TX_C_DP
B14 SAS2_TX_C_DN
B15
B16 SAS3_TX_C_DP
B17 SAS3_TX_C_DN
B18
MTH5
MTH6
MTH7
MTH8
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
Revision 2.1