Qlogic QL45212 User Manual page 3

User's Guide—25Gb Intelligent Ethernet Adapter
QL45212
Removed "Running the Dell Update Package from
the Command Line" topic.
Updated the list of RHEL source and kmod RPM
package names. Added SLES source and kmod
RPM packages.
Updated Step 1, first bullet command
rpm -e kmod-qlgc-fastlinq-<version>.
<arch> to
rpm -e qlgc-fast-
linq-kmp-default-<version>.<arch>
Added new Step 1 "Type the following command to
get the path to the currently installed drivers: mod-
info <drivername>.
Replaced references to rmod qede and rmod
qed with modprobe -r qede.
Added new note "If the qedr is present, use mod-
probe -r qedr instead."
Added new Step 1 "Type the following command to
get the path to the currently installed drivers: mod-
info <drivername>.
Deleted reference to "modprobe -r qede,
modprobe -r qed, and depmod -a."
Updated Step 2, first bullet command
rpm -e kmod-qlgc-fastlinq-<version>.
<arch> to
rpm -e qlgc-fast-
linq-kmp-default-<version>.<arch>
Added reference to CentOS on Step 2, second bul-
let, under "For RHEL"
Updated Step 1 command
rpm -ivh RPMS/<arch>/kmod-qlgc-fast-
linq-<version>.<arch>.rpm to
rpm -ivh RPMS/<arch>/qlgc-fast-
linq-<version>.<arch>.rpm
Updated Step 2 rmpbuild commands for RHEL
and SLES to use -bb instead of -dd.
Updated Step 3 command
rpm -ivh RPMS/<arch>/kmod-qlgc-fast-
linq-<version>.<arch>.rpm to
rpm -ivh RPMS/<arch>/qlgc-fast-
linq-<version>.<arch>.rpm
"Installing Drivers" on page 9
"Linux Driver Software" on page 10
"Removing Linux Drivers in a non-RoCE Environ-
ment" on page 12
"To remove Linux drivers in a non-RoCE environ-
ment:" on page 12
"To remove Linux drivers in a RoCE environment:"
on page 13
"Removing Linux Drivers in a RoCE Environment"
on page 13
"Removing Linux Drivers in a RoCE Environment"
on page 13
"Installing Linux Drivers Using the src RPM Pack-
age" on page 14
iii BC0154503-00 C