Managing Adapter Properties; Setting Power Management Options - Qlogic QL45212 User Manual

3–Installing Drivers
Windows Driver Software

Managing Adapter Properties

To view or change the QL45212 Adapter properties
1. In Control Panel, click Device Manager.
2. Click the Advanced section of the chosen port.

Setting Power Management Options

You can set power management options to allow the operating system to turn off
the controller to save power or to allow the controller to wake up the computer. If
the device is busy doing something (servicing a call, for example), the operating
system will not shut down the device. The operating system attempts to shut down
every possible device only when the computer attempts to go into hibernation. To
have the controller stay on at all times, unselect the Allow the computer to turn
off the device to save power check box
NOTE
The Power Management tab is available only for servers that support
power management. Do not select Allow the computer to turn off the
device to save power for any adapter that is a member of a team.
Figure 3-9. Power Management
26
(Figure 3-9).
BC0154503-00 C