Uconnect 6.5 NAV Owner's Manual page 97

96 UCONNECT PHONE
Touch-Tone Number Entry
1. Press the "Phone" button on the touchscreen.
2. Press the "Dial" button on the touchscreen.
3. The Touch-Tone screen will be displayed.
4. Use the numbered buttons on the touchscreens to enter
the number and press "Call."
To send a touch-tone using Voice Recognition (VR), push
the Voice Command
while in a call and say "Send 1234#" or you can say
"Send Voicemail Password" if Voicemail password is
stored in your mobile phonebook.
Recent Calls
You may browse up to 31 of the most recent of each of the
following call types:
• All Calls
• Incoming Calls
• Outgoing Calls
• Missed Calls
These can be accessed by pressing the "recent calls" button
on the Phone main screen.
button on your steering wheel
You can also push the
and say "Show my incoming calls" from any screen and
the Incoming calls will be displayed.
NOTE: Incoming can also be replaced with "Outgoing,"
"Recent" or "Missed."
Answer Or Ignore An Incoming Call — No Call
Currently In Progress
When you receive a call on your mobile phone, the
Uconnect Phone will interrupt the vehicle audio system.
Push the Phone button on the steering wheel to accept
the call. You can also press the "answer" button on the
touchscreen or press the caller ID box.
Answer Or Ignore An Incoming Call — Call
Currently In Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
mobile phone. Push the Phone
wheel, or press the "answer" button on the touchscreen,
or caller ID box, to place the current call on hold and
answer the incoming call.
button on your steering wheel
button on the steering