Uconnect 6.5 NAV Owner's Manual page 100

entries. For example, if you previously created a Phone-
book entry with First and/or Last Name as "Voicemail
Password", then if you push the Voice Command
ton and say "Send Voicemail Password" the Uconnect
Phone will then send the corresponding phone number
associated with the phonebook entry, as tones over the
phone.
NOTE:
• The first number encountered for that contact will be
sent. All other numbers entered for that contact will be
ignored.
• You may not hear all of the tones due to mobile phone
network configurations. This is normal.
• Some paging and voice mail systems have system time
out settings that are too short and may not allow the use
of this feature.
• Pauses, wait or other characters that are supported by
some phones are not supported over Bluetooth. These
additional symbols will be ignored in the dialing a
numbered sequence.
Barge In — Overriding Prompts
The Voice Command
but-
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking "There are two numbers with the name John. Say
the full name" you could push the Voice Command
button and say, "John Smith" to select that option
without having to listen to the rest of the voice prompt.
Voice Response Length
To choose between "Brief" and "Detailed" Voice Response
Length.
1. Push the Settings button on the faceplate.
2. Press the "Voice" button on the touchscreen.
3. Select either "Brief" or "Detailed" by pressing the but-
ton, highlighting your selection.
Phone And Network Status Indicators
Uconnect Phone will provide notification to inform you of
your phone and network status when you are attempting
to make a phone call using Uconnect Phone. The status is
given for network signal strength and phone battery
strength.
UCONNECT PHONE 99
button can be used when you
6