Uconnect 6.5 NAV Owner's Manual page 43

42 ALL ABOUT UCONNECT ACCESS
the menu bar of the radio to see the main Phone screen. A
minute or so after a compatible MAP enabled phone has
been Bluetooth connected to the vehicle; the "messaging"
button on the touchscreen will change from gray to white.
This is an indicator that Voice Texting will work with your
phone. Outgoing voice texts may not be possible. The
phone may allow incoming texts only.
Determine if your phone has been tested to support
Bluetooth "Message
UconnectPhone.com. (Your phone may support Voice
Texting even if not found on this website. Check with your
phone manufacturer to see if it supports MAP protocol.)
Access Profile" (MAP)
NOTE: If your device supports MAP, then ensure MAP is
on and incoming message notification is enabled, (see
UconnectPhone.com for device specific instructions).
If a Bluetooth authorization window appears showing
your phone requesting permissions, check the box for
Always and press Accept.
Sending A New Text Message From Radio
1. Push on the steering wheel.
2. Say "Send text message."
3. The system will respond "Say the phone number or the
full name and the phone type of the contact that you
want to send a message to."
4. Dictate message ("I will be home at eight.")
5. When finished dictating, wait for prompt and say
"Send."
at