Uconnect 6.5 NAV Owner's Manual page 52

6. A message will appear on the screen to let you know if
the command was received by your vehicle.
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
NOTE: If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into the
Mopar Owner
(moparownerconnect.com), select the vehicle you want
to send the command by clicking on its image along the
top.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To start the engine, press the "circular
arrow", to turn-off an engine that has been remote
started press the "cancel" button.
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when your
registered your Uconnect Access system). Please enter
your Uconnect Security PIN.
Connect website
ALL ABOUT UCONNECT ACCESS 51
5. A message will appear on the screen to let you know if
the command was received by your vehicle.
Uconnect Care:
1. If you need to unlock the doors of your vehicle, contact
Uconnect Care by calling:
855-792-4241
NOTE: The Uconnect Care Agents are trained to help you
with unlocking of your door (for example, in an accidental
lock-out). All other Remote Services should be performed
via the Mopar
(moparownerconnect.com) or through the Uconnect Ac-
cess App on your compatible device.
2. For security purposes, the Uconnect Care Agent will
verify your identity by asking for your 4-digit Uconnect
Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
Owner Connect website
3