Where To? - Trips - Uconnect 6.5 NAV Owner's Manual

122 NAVIGATION
3. Once you have generated your Home Address, you will
be asked to Save it.
4. Press the "Save" button to confirm your destination and
begin the route to your Home Address.
5. This address will be saved as your Home Address and it
can be accessed by pressing the "Go Home" button in
the Where To? Menu.
Change/Delete Your Home Address
To change or delete your current Home Address perform
the following:
1. Press the "Go Home" button in the Where To? Menu.
2. Press the "Options" button at the bottom of the dis-
played map.
3. Press "Clear Home" and then "Yes" to clear/delete your
Home Address.
4. To enter in a new Home Address, follow the Where To?
– Go Home procedure.
NOTE: You can press the "Back Arrow" button to return to
the previous screen or the "X" button to exit.
Where To? — Trips
To route to a saved Trip, press the "Recent" button in the
NAV Main Menu.
Press the button with the name of the desired Trip and
press the first destination in the list. Confirm the route by
pressing "Yes" to start the route guidance.
To add a Trip, follow these steps:
1. Press the "Create new Trip" button.
2. Type in the new Trip Name.
3. Press "Add Destination" to add destinations to your
trip.
4. Choose from the following options to add a destination.
NOTE: Refer to the individual section of the chosen option
for further information.
• Address
• Recent
• Point of Interest
• Favorites
• Intersection
• GEO Coordinates
• Point on Map