Information - Uconnect 6.5 NAV Owner's Manual

132 NAVIGATION
• Junction View
Press this button on the touchscreen to enable Junction
View during route guidance. Press and release the button
on the touchscreen until a check-mark appears, showing
the setting has been selected.
• Navigation Turn-by-Turn Displayed In Cluster
Press this button on the touchscreen to enable navigation
turn-by-turn displayed in vehicles cluster during route
guidance. Press and release the button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
• TMC Route Mode (If Equipped)
Press this button on the touchscreen to change how the
Traffic Message Channel (TMC) Route Mode functions
during route guidance. Select from:
– Automatic
– By Delay Time
– Manual
– Off
• TMC Avoidance Types (If Equipped)
Press this button on the touchscreen to display the avail-
able Traffic Message Channel (TMC) Avoidance Types you
would like displayed while in route guidance. Press and
release the desired selection button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
• Avoid
Press the Avoid button on the touchscreen to choose road
types to avoid during your route. To make a selection press
and release the desired setting until a check-mark appears.
NOTE: You can press the "back arrow" button on the
touchscreen to return to the previous screen or the "X"
button on the touchscreen to exit.

INFORMATION

From the Nav Main Menu, push the "Information" button
and select one of the following options to view additional
information.
• Traffic
• Where Am I?
• Trip Computer
NOTE: You can push the "Back Arrow" button to return to
the previous screen or the "X" button to exit.