Page 1 Uconnect 8.4A/8.4AN ® Owner’s Manual Supplement...
Page 2: Identifying Your Radio 3
UCONNECT® 8.4AN — IF EQUIPPED ........
Page 4 IDENTIFYING YOUR RADIO CONTENTS ▫ Key Features ......4 IDENTIFYING YOUR RADIO ....4...
Page 5: Identifying Your Radio
4 IDENTIFYING YOUR RADIO IDENTIFYING YOUR RADIO Key Features Uconnect® 8.4A/8.4AN The 8.4A and 8.4AN share some features between them, but the 8.4AN has some features that sets it apart. The below features are shared between them: • 8.4” Touchscreen •...
Page 6: Contents
IDENTIFYING YOUR RADIO 5 The 8.4AN sets itself apart by offering these unique NOTE: 3D Landmarks are visible at 250ft and below, 3D features: City Models are visible at 50ft and below and Digital Terrain is visible at 100mi and below. •...
Page 8 Vehicle ......36 ▫ What Is Uconnect® Access? ....9 ▫...
Page 9: Table Of Contents
MAINTAIN MY Uconnect® ACCESS Uconnect® ......169 ACCOUNT ......154...
Page 10: All About Uconnect® Access 7
INTRODUCTION TO Uconnect® ACCESS Uconnect® Access provides: • The ability to remotely lock/unlock your doors and To unlock the full potential of Uconnect® Access in your vehicle, you first need to register with Uconnect® Access. start your vehicle (if equipped) from virtually any- where, with the Uconnect®...
Page 11 The ASSIST Button is used for contacting Roadside Assistance, Vehicle Care and Uconnect® Care. The 9-1-1 button connects you directly to emergency services. 2. The Uconnect® “Apps” Button On The Menu Bar At The Bottom Right Corner Of The In-Vehicle Touch- screen This is where you can begin registration for Uconnect®...
Page 12 Uconnect® features and applications in this ve- hicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involv- ing serious injury or death.
Page 13 7 — Tune or Scroll Knob/Browse or Enter Button Wheel) 8 — Remote Disc Player (If Equipped) 2 — Uconnect® Voice Command Button 9 — Media Hub-may include USB port, SD Card and Audio Jack 3 — Uconnect® Phone Button (Inside Center Console) 4 —...
Page 14 Included Trial Period For New Vehicles Your new vehicle may come with an included trial period for use of the Uconnect® Access Services starting at the date of vehicle purchase*. To activate the trial, you must first register with Uconnect® Access. Once registered, Uconnect®...
Page 15 For a more complete description, please refer to the User Guide in your glove box or visit DriveUconnect.com. • Both the Uconnect® 8.4A and Uconnect® 8.4AN fea- ture a large 8.4 inch full color touchscreen. • Only the Uconnect® 8.4AN will have the HD Radio icon when listening to FM or AM stations.
Page 16: Getting Started With Uconnect® Access
DriveUconnect.com. GETTING STARTED WITH Uconnect® ACCESS Registration To unlock the full potential of Uconnect® Access in your vehicle, you first need to register with Uconnect® Access. 1. From the parked vehicle with the radio touchscreen powered on, press the “Apps” button located near the...
Page 17 16 ALL ABOUT Uconnect® ACCESS 2. Press “Register” on the reminder screen or select the 3. The Uconnect® Access Registration App will open “Uconnect® Registration” button on the touchscreen and display step-by-step instructions to start your which appears in the “Favorites Tab” on the Apps list.
Page 18 In a few minutes, you will receive an email which will allow you to register your vehicle for Uconnect® Access. You should open this email and begin your Uconnect® Access registration within 72 hours.
Page 19 18 ALL ABOUT Uconnect® ACCESS 6. Check for an email from Uconnect® Access that con- tains your personalized registration link. If you don’t see it, check your spam or junk mail folder. Open the email and click on the link to continue registering.
Page 20 ALL ABOUT Uconnect® ACCESS 19...
Page 21 For additional registration assistance while in the vehicle, turn the ignition on and push the ASSIST button to contact Uconnect® Care. 7. To unlock the full potential of Uconnect® Access in your vehicle, you will need to create or validate an existing Mopar Owner Connect account (previously Owner Center).
Page 22 ALL ABOUT Uconnect® ACCESS 21...
Page 23 8. Once you are logged in to your Mopar Owner Connect account, you will create a personal Uconnect® Secu- rity PIN. The Uconnect Security PIN will be required to authenticate you when accessing your account via Uconnect® Care or performing any remote services such as Remote Door Lock/Unlock, Remote Horn &...
Page 24 (such as WiFi Hotspot) and can be used to ensure uninterrupted service at the end of the included trial period. Your Uconnect® Payment Account is optional, but we recommend it so that you can enjoy the full benefits of the system.
Page 25 24 ALL ABOUT Uconnect® ACCESS Setting up AFTER registration and Managing your Uconnect® Payment Account If you didn’t set up your Uconnect® Payment Account when you registered, or you want to make changes later on, just go to moparownerconnect.com to manage your account.
Page 26 ALL ABOUT Uconnect® ACCESS 25 • Reviewing your current subscriptions to packages and Apps • Changing your Uconnect® Payment PIN, or your Security Question • Viewing transaction history of purchases from the Uconnect® Store...
Page 27 26 ALL ABOUT Uconnect® ACCESS Download the Uconnect® Access App The Uconnect® Access smartphone app allows you to remotely lock or unlock your doors, start your engine (if equipped) and activate your horn and lights from virtu- ally anywhere. The smartphone app also features Via Mobile (if equipped) which uses your smartphone’s data...
Page 28 ALL ABOUT Uconnect® ACCESS 27 Once you’ve confirmed your smartphone is compatible, Android and iPhone® users should visit their respective The Uconnect® Access app is only compatible with select app store and search for “Uconnect® Access”. iPhone® Android smartphones. Visit UconnectPhone.com to confirm that your smartphone is...
Page 29 Why do I need the Uconnect® Access App? iHeartRadio, Slacker Radio and Aha™ from the ve- Unlike your key fob, the Uconnect® Access app on your hicle and control them using your vehicle touchscreen smartphone can send commands to your vehicle from any distance so long as your phone and vehicle are both in cellular range.
Page 30 ALL ABOUT Uconnect® ACCESS 29...
Page 31 • Your smartphone sending the command must be in cellular range to send the command • Vehicle must be registered with Uconnect® Access and have an active subscription that includes the appli- cable feature or App • Owner must have a compatible smartphone and download the Uconnect®...
Page 32 ALL ABOUT Uconnect® ACCESS 31 FAQs 3. Why can’t all phones use the Uconnect® Access App? The Uconnect® Access App has been designed 1. How much does the Uconnect® Access App cost? to work on most smartphones with the Apple and Uconnect®...
Page 33 If you do not have an account, you can create one. Determine if Your Vehicle is Via Mobile-enabled To see if your Uconnect® 8.4A or 8.4AN system is equipped with Via Mobile Apps, press the “Apps” button on the touchscreen, then press the “All Apps” button on the left side of the touchscreen.
Page 34 Media (A2DP) profile. If using an iPhone®, a USB Using Via Mobile cable may also be used for the data connection. Launch the Uconnect® Access app on your connected Data Usage smartphone and log in with your Mopar Owner Connect Username/Email and password.
Page 35 The Via Mobile button provides a status indication of the smartphone connection for Via Mobile app use. Under “Settings” in the Uconnect® Access app on your smart- phone, confirm that Via Mobile data has been turned on. • Green indicates the data connection is ready •...
Page 36 ALL ABOUT Uconnect® ACCESS 35...
Page 37 Vehicle Vehicle: Apps and WiFi Hotspot can be purchased from the 1. With the vehicle parked and the radio powered on, Uconnect® Store from within your vehicle, and online at press the “Apps” button located near the bottom Mopar Owner...
Page 38 ALL ABOUT Uconnect® ACCESS 37 2. To launch the Uconnect® Store, select Apps > All Apps 3. From the Uconnect® Store, select the service you wish > Uconnect® Store. to purchase.
Page 39 38 ALL ABOUT Uconnect® ACCESS 4. This will launch the selected service or package into 5. The Uconnect® Store will display a “Purchase Over- purchase mode along with providing additional infor- view” message confirming the financial details for the mation. The purchase process begins when you press App you are about to purchase.
Page 40 ALL ABOUT Uconnect® ACCESS 39 6. The User must select “AGREE” to complete the pur- 7. The Uconnect® Store will ask you to “Confirm Pay- chase. “DISAGREE” will cancel the purchase and ment” using your default payment method on file in re-direct customers back to the Uconnect®...
Page 41 40 ALL ABOUT Uconnect® ACCESS 8. The Uconnect® Payment Account will then ask for your “Payment PIN.” After entering this four digit PIN, press the “Continue” button on the touchscreen to make the purchase. NOTE: Purchased Apps and services can take up to 30 minutes to download, depending on your vehicle’s cel-...
Page 42 ALL ABOUT Uconnect® ACCESS 41 Purchasing Apps Online From Mopar Owner Connect Website You can also purchase Apps or renew your subscription to a package from the Mopar Owner Connect website. Log In to the Mopar Owner Connect website moparownerconnect.com with your username/email and password, and click on the “Store”...
Page 43 42 ALL ABOUT Uconnect® ACCESS 3. Click on the link to the Uconnect® Store. 4. You can now browse through the various packages, features and Apps available for your vehicle. Look through your options, read the details, and if you find something you want for your vehicle click on the “Purchase”...
Page 44 It is also where you can manage your Uconnect® Access account. This section will familiarize you with the key elements of the website that will help you get the most of your Uconnect®...
Page 45 Other vehicles you own may not have Uconnect® Uconnect® Access App. Phone compatibility can be Access and will indicate that it is a non-Uconnect® verified at UconnectPhone.com. For more details, see Access Vehicle.
Page 46 ALL ABOUT Uconnect® ACCESS 45 8. Learn & Use: To get the Uconnect Access App from the Mopar Owner Connect website: Click on the “Learn & Use” tab to find user guides and other information about your vehicle. More specifi- 1.
Page 47 46 ALL ABOUT Uconnect® ACCESS 5. You can enter up to five mobile phone and/or email addresses to your notifications, and you can customize which ones receive the types of messages. 6. If you add a mobile phone number, you will receive a confirmation text message asking to confirm and receive vehicle notifications.
Page 48: Getting Started With Apps
ALL ABOUT Uconnect® ACCESS 47 USING Uconnect® ACCESS Get started with your Uconnect® Access Apps by press- ing the Uconnect® “Apps” button on the menu bar at the Getting Started With Apps bottom right corner of the in-vehicle touchscreen. Avail- Applications (Apps for short) in your Uconnect®...
Page 49 48 ALL ABOUT Uconnect® ACCESS Access features work using the built-in cellular connec- Uconnect® Access In-Vehicle Assistance Features tion. Only Voice Texting the Uconnect® Access App and With Uconnect® Access, your vehicle has on-board assis- Via Mobile Apps require a compatible smartphone to tance features located on the rear view mirror designed to work with your Uconnect®...
Page 50 ALL ABOUT Uconnect® ACCESS 49 NOTE: In case the “9-1-1” Call button is accidentally If a connection is made between a 9-1-1 operator and pushed, there is a 10 second delay before the 9-1-1 call is your vehicle, you understand and agree that 9-1-1 opera- placed.
Page 51 50 ALL ABOUT Uconnect® ACCESS • Wireless network congestion. Even if the 9-1-1 Call system is fully functional, factors beyond Chrysler Group LLC’s control may prevent or • Weather. stop 9-1-1 Call system operation. These include, but are • Buildings, structures, geographic terrain, or tunnels.
Page 52 ALL ABOUT Uconnect® ACCESS 51 Requirements WARNING! • This feature is available only on vehicles sold in the • Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent • Vehicle must be properly equipped with the wireless and GPS signal reception, which can pre- Uconnect®...
Page 53 • If anyone in the vehicle could be in danger (e.g., (including during or after an accident) the fire or smoke is visible, dangerous road conditions Uconnect® features, Apps and services among oth- or location), do not wait for voice contact from a ers will not operate.
Page 54 ALL ABOUT Uconnect® ACCESS 53 FAQs Roadside Assistance Call Easy Call To Roadside Assistance 24/7 Using Assist 1. What Happens If I Accidentally Push The 9-1-1 Button Button On The Mirror? You have 10 seconds after pushing the 9-1-1 button to cancel the call. To cancel the call, either push the “9-1-1”...
Page 55 • Roadside Assistance — If you get a flat tire, or need a tow, you’ll be connected to someone who can help anytime. Additional fees may apply. (see the Disclaim- ers section below for more detail). • Uconnect® Care — In vehicle support for Uconnect® Access System, Apps, and Features.
Page 56 In order to • Vehicle must be properly equipped with the provide Uconnect® Services to you, we may record and Uconnect® Access System. monitor your conversations with Roadside Assistance, •...
Page 57 Point of Interest (POI) or desired destination using either pre-defined search categories, or 2. If I Am Subscribed To Uconnect® Access, Does It custom searches, using keywords like “tacos.” Searching Cover Towing Or Other Expenses Incurred By Using...
Page 58 ALL ABOUT Uconnect® ACCESS 57 • The live and local search engine will scan 12 categories How It Works and millions of POIs to provide drivers with a local 1. Using the touchscreen, launch Yelp® by pressing guide for real word-of-mouth recommendations.
Page 59 3. Uconnect® will prompt you to say something like, “car wash.” After the beep, say “restaurants.” 4. The Uconnect® system will link out to the cloud to do your Yelp® search, and depending on your search request, this may take up to 30 seconds.
Page 60 ALL ABOUT Uconnect® ACCESS 59 Voice Command (VR Action Touchscreen button on steering Give It A Try! wheel) Open Yelp® Apps > All Apps > Launch Yelp® Say Launch Yelp® Yelp® Create a Custom Search Press inside the search Type Sushi field.
Page 61 60 ALL ABOUT Uconnect® ACCESS Voice Command (VR Action Touchscreen button on steering Give It A Try! wheel) Find nearest Hotels Select Hotels Hotels Say Hotels Find nearest Banks Select Banks Banks Say Banks Find nearest Parking Select Parking Parking...
Page 62 ALL ABOUT Uconnect® ACCESS 61 Voice Command (VR Action Touchscreen button on steering Give It A Try! wheel) Sort search results by Best Press Best Match, Rating, – Press Rating Match, Rating or Distance or Distance Route to a POI (if Press Go Now –...
Page 63 62 ALL ABOUT Uconnect® ACCESS • Vehicle must be registered with Uconnect® Access and How To Add And Delete Search Categories have an active subscription that includes the appli- Yelp® provides the ability to save cus- cable feature or App.
Page 64 Only use Uconnect® when it is safe to do so. Failure to do so • If you wish to cancel a search request, press “Cancel.” may result in an accident involving serious injury •...
Page 65 Push the ASSIST button and select 6. Can I conduct a search using a phone number? The Uconnect® Care to ask for help. ability to search Yelp® by phone number is not 2. Will Yelp® allow me to route directly to my desired currently available.
Page 66 3G connection in your but may yield the same results. For example, while Uconnect® Access system. Be sure to wait until AF- both the onboard navigation system and Yelp® con- TER the beep, before you speak your search request.
Page 67 66 ALL ABOUT Uconnect® ACCESS 10. How come I don’t see the same results when I use Description Yelp® on my smart phone? This is because Yelp® is The Theft Alarm Notification feature notifies you via only returning locations that have been rated by email or text message (SMS) when the vehicle’s factory-...
Page 68 • Vehicle must be properly equipped with the Uconnect® Access System and a factory installed Theft 4. If you have more than one vehicle with Uconnect® Alarm system. Access, please select which vehicle you want to man- age notifications for using the drop down menu.
Page 69 68 ALL ABOUT Uconnect® ACCESS • Vehicle must be registered with Uconnect® Access and FAQs have an active subscription that includes the appli- 1. What do I do if my Theft Alarm goes off? In the event cable feature or App.
Page 70: Stolen Vehicle Assistance
ALL ABOUT Uconnect® ACCESS 69 3. Can I receive a text message (SMS) when my Theft Uconnect® Care Agent will ask for the stolen vehicle Alarm goes off? Yes. Text messages are a convenient report number issued by local law enforcement. Then, and quick way to receive notifications.
Page 71 • No security system is invincible, and vehicle thieves 4. Uconnect® Care will work with your local law en- may develop ways to prevent your vehicle from being forcement to track and attempt to recover the vehicle.
Page 72 They will work with with law enforcement to try to locate your vehicle. If you to file a stolen vehicle report. Then call Uconnect® your vehicle is recovered, you will be contacted by law Care at 855-792-4241 and inform Uconnect® Care that enforcement.
Page 73: Wifi Hotspot
• Connect several devices at one time. to go whenever you are. Once your vehicle is registered for Uconnect® Access, you can • Any WiFi-enabled device — such as a laptop or any purchase a WiFi Hotspot subscription at the Uconnect®...
Page 74 • From Mopar Owner Connect website (moparownerconnect.com) > Shop > Uconnect® Store. NOTE: You must set up your Uconnect® Payment Ac- count on the Mopar Owner Connect website and estab- lish a Uconnect® Payment PIN to purchase WiFi Hotspot.
Page 75 74 ALL ABOUT Uconnect® ACCESS 2. After purchasing WiFi Hotspot, it will be enabled/ turned on in your vehicle. The WiFi Hotspot App can be found on your in-vehicle touchscreen by selecting Apps > All Apps > WiFi Hotspot. 3. WiFi Hotspot should be turned on after purchasing a subscription.
Page 76 ALL ABOUT Uconnect® ACCESS 75 Optional: Give your hot spot a unique name by 4. From your in-vehicle touchscreen, select the appropri- pressing Hotspot Name (key pad is not available ate in-vehicle network and the desired security level while vehicle is in motion).
Page 77 WiFi Hotspot. 5. From your Wi-Fi enabled device (laptop, tablet, etc.) • Search for and select the Uconnect® hotspot in the settings of your device • Type the network security key (this is called “pass phrase”...
Page 78 ALL ABOUT Uconnect® ACCESS 77 • Vehicle must be registered with Uconnect® Access and have an active WiFi Hotspot subscription ( WiFi Out- post will be turned off if there is no active subscription). • Vehicle must be in the ON/RUN or ACC (Accessory) position and have a properly operating electrical sys- tem for any of the in-vehicle Uconnect®...
Page 79 You have full responsibility and assume all risks • To quickly enable or disable WiFi Hotspot, press to related to the use of the Uconnect® features and check or uncheck the box to the right of the App. applications in this vehicle. Only use Uconnect®...
Page 80 ALL ABOUT Uconnect® ACCESS 79 FAQs 4. What if I want to create a custom password for my connection? Select either WPA2/WPA or the WEP 1. How do I know if I have a good signal strength? setting and create a pass phrase by pressing Apps >...
Page 81: Plus
80 ALL ABOUT Uconnect® ACCESS SRT Performance Pages/SRT Performance Pages How It Works Plus From the Radio touchscreen Save And Share Your Best Performance Results With 1. Press the “SRT & Apps” button at the bottom of the The SRT Performance Pages App. (Available Only On screen.
Page 82 ALL ABOUT Uconnect® ACCESS 81 5. You can navigate between the Menu item performance button tabs on the left side of screen.
Page 83 82 ALL ABOUT Uconnect® ACCESS 1 — Home 4 — Gauges 1 1 — Gauges 2 2 — Timers 5 — “Scroll Down” Button 2 — Engine 3 — G-Force 3 — Options 4 — “Scroll Up” Button...
Page 84 ALL ABOUT Uconnect® ACCESS 83 6. If you chose the Timers tab, you will get an overview of vehicle run time stats. You can view and compare driving performance by choosing between your “Best,” “Last” and “Current” run times. This data can be saved, downloaded and shared.
Page 85 84 ALL ABOUT Uconnect® ACCESS...
Page 86 ALL ABOUT Uconnect® ACCESS 85 Downloading Timers Data USB — If you choose “USB,” plug the USB stick into the USB port, press the “USB” button on the touchscreen, Choosing the “Save” button on the touchscreen allows and follow the instructions to download the timer.
Page 87 86 ALL ABOUT Uconnect® ACCESS Once the option to Save is selected, you will receive a The file will save with the name: RunType, Date and confirmation notification. If you selected to save to the Time file was saved, and Vehicle Line. Example of a website, the URL will be provided where you can view saved file name is “Best_19JAN11_0930AM_Viper.html”...
Page 88 ALL ABOUT Uconnect® ACCESS 87 Only the 10 most recent saved runs will be stored and 7. If you chose the G-Force tab, you will see displays of available on the website, so the oldest run will be the vehicle dynamics from G-Force page including overwritten for another if there are already 10.
Page 89 88 ALL ABOUT Uconnect® ACCESS 8. If the Gauges 1 tab is chosen, you will see a display of 9. If the Gauges 2 tab is chosen, you will see a display of vehicle gauges. Information displayed will be the...
Page 90 ALL ABOUT Uconnect® ACCESS 89 NOTE: Graphic will represent the owner’s vehicle, e.g. Viper or Grand Cherokee. • Vehicle Color Options — Customize the color of the vehicle displayed on the home picture. • Accept Button — Saves your selections.
Page 91 Timer milestone or a Timer constraint is broken. equipped with the Uconnect® Access System. • Vehicle must be in range of a usable and authorized 3G NOTE: If the vehicle does not reach a Timer milestone or a Timer constraint is broken, the data will show only cellular signal.
Page 92 Disclaimers • If accessing Timers screen after an ignition cycle • Vehicle must be registered with Uconnect® Access and and/or battery removal, if the driver selects “Current”, have an active subscription to get SRT Performance double dashes (“- -”) will display for all timers, until Pages Plus.
Page 93 4. Do I need to register? You need to register the vehicle cess and download your performance data. and subscribe to Uconnect® Access in order to get SRT 8. Why does my Timer performance data only show Performance Pages Plus. If a customer does not regis- dashes? Dashes will display if the Timer milestone ter, SRT Performance Pages will still be available.
Page 94: Voice Texting
Just speak your message how long? Performance timers are maintained as as if you were talking to the recipient, and the Uconnect® long as you drive the vehicle. You can save the Access voice-texting technology will convert your voice statistics at any time.
Page 95 94 ALL ABOUT Uconnect® ACCESS How It Works NOTE: If phone supports MAP, then ensure MAP is on and incoming message notification is enabled, (see Set Up Your Phone To Work With Voice Texting UconnectPhone.com for phone specific instructions). After pairing your phone to the vehicle using Bluetooth®...
Page 96 ALL ABOUT Uconnect® ACCESS 95 Generic Phone Setup Instructions (your phone’s setup If a Bluetooth® authorization window appears showing process may be similar): your phone requesting permissions, check the box for Always and press Accept. 1. On phone select “Settings” (or the equivalent on your...
Page 97 96 ALL ABOUT Uconnect® ACCESS Dictate A Free-Form Reply To A Message From Radio 4. The system will repeat the message you dictated and (Voice Text Reply) state available commands. If your message was too long, the system will respond with “Your message was 1.
Page 98 ALL ABOUT Uconnect® ACCESS 97 To Reply To A Message With A Pre-Formatted Re- 1. Press “View” next to the message sponse (Voice Text Reply) 2. Press “Reply” 3. Select the pre-formatted response by pressing it (“I can’t talk right now”) 4.
Page 99 98 ALL ABOUT Uconnect® ACCESS Viewing Your Messages 1. Push the “Phone” button on the steering wheel. 2. Say “View message.” Press “View” on the in-vehicle touchscreen.
Page 100 Listening To A Message 1. Press “Listen” on the touchscreen or push the “Phone” button on the steering wheel and say “Listen,” the Uconnect® system will read the received text message over the vehicle audio system. Barge-In Barge-in is a feature that enables a user to say a valid...
Page 101 To check if your device has been tested to be compat- ible please visit UconnectPhone.com. • Available on vehicles sold in the United States with a Uconnect® 8.4A (sales code RA3) or Uconnect® 8.4AN Disclaimers (sales code RA4) radio equipped with Uconnect®...
Page 102 If your phone is not listed, you may still be able to pair and connect your MAP supported phone to a compatible Uconnect® radio to see if all or WARNING! most voice texting functions work. Check your phone manufacturer if MAP is supported on your phone.
Page 103 (SMS) sent to your portable cellular mobile phone by 4. Do I have to “train” my Uconnect® radio to my voice while in your vehicle. voice? Chrysler uses the latest voice recognition en- 8.
Page 104: Remote Door Lock/Unlock
ALL ABOUT Uconnect® ACCESS 103 • Using the Uconnect® Access App from a compatible 10. Can I use Text Messaging if the “messaging” button doesn’t turn white? Only MAP compatible phones smartphone will work with Text Messaging. If your phone is •...
Page 105 1. Log on to the Mopar® Owner Connect website 3. A pop-up screen will appear asking for your (moparownerconnect.com) using the username and Uconnect® Security PIN (this is the same 4- digit code password you used when registering your Uconnect® established when your registered your Uconnect®...
Page 106 To lock the doors, click on the closed lock icon; to unlock the driver’s door click on the “open lock icon.” 4. You will then be asked to enter your Uconnect® Security PIN (this is the same 4-digit code established when your registered your Uconnect® Access system).
Page 107 Uconnect® Care by calling 855-792-4241. done. NOTE: The Uconnect® Care agents are trained to help Give It A Try! you with unlocking of your door (for example, in an •...
Page 108 • Vehicle must be registered with Uconnect® Access and 2. Which is faster, my Key Fob or the Uconnect® Access have an active subscription that includes the appli- App? Your Key Fob will lock/unlock the door quicker, cable feature or App.
Page 109: Remote Vehicle Start
108 ALL ABOUT Uconnect® ACCESS 3. Will my vehicle be safe if I lose my smartphone? 5. Why is the Uconnect® Access App running slow? People sometimes lose their phone, which is why The Uconnect® Access App relies on the cellular...
Page 110 How It Works send a request to your vehicle in one of two ways: Uconnect® Access App: • Using the Uconnect® Access App from a compatible 1. Download the Uconnect® Access App to a compatible smartphone. smartphone and login using your username and pass- •...
Page 111 1. Log on to the Mopar Owner Connect website 3. A pop-up screen will appear asking for your (moparownerconnect.com) using the username and Uconnect® Security PIN (this is the same 4- digit code password you used when registering your Uconnect® established when your registered your Uconnect®...
Page 112 “cancel” button. 4. You will then be asked to enter your Uconnect® Security PIN (this is the same 4-digit code established when your registered your Uconnect® Access system).
Page 113 112 ALL ABOUT Uconnect® ACCESS Uconnect® Care: Give It A Try! • Download the Uconnect® Access App to your smart- 1. If you need to unlock the doors of your vehicle, contact Uconnect® Care by calling 855-792-4241. phone. • Enter the username and password that you established NOTE: The Uconnect®...
Page 114 • Vehicle must be in range of a usable and authorized improve performance. cellular signal. 2. Which is faster, my Key Fob or the Uconnect® Access • Vehicle must be registered with Uconnect® Access and App? Your Key Fob will remote start your vehicle have an active subscription that includes the appli- quicker, however its range is limited.
Page 115: Remote Horn And Lights
114 ALL ABOUT Uconnect® ACCESS 3. Will my vehicle be safe if I lose my smartphone? 6. Why can’t all phones use the Uconnect® Access People sometimes lose their phone, which is why App? The Uconnect® Access App has been designed...
Page 116 ALL ABOUT Uconnect® ACCESS 115 • Using the Uconnect® Access App from a compatible 3. A pop-up screen will appear asking for your smartphone Uconnect® Security PIN (this is the same 4- digit code established when your registered your Uconnect® • From Mopar...
Page 117 Fob if you are near the vehicle. a row of icons. To turn on the horn and lights, press the 4. You will then be asked to enter your Uconnect® “trumpet icon.” To turn off the horn and lights, press Security PIN (this is the same 4-digit code established the “trumpet icon”...
Page 118 1. If you need to unlock the doors of your vehicle, Give It A Try! contact Uconnect® Care by calling 855-792-4241. • Download the Uconnect® Access App to your smart- NOTE: The Uconnect® Care agents are trained to help phone.
Page 119 118 ALL ABOUT Uconnect® ACCESS • Push the button to sound your vehicle’s horn and flash • If using the Uconnect® Access App to command your the lights. vehicle, your smartphone must be compatible and in range of a cellular signal.
Page 120 “Panic” button. 2. Which is faster, my Key Fob or the Uconnect® Access 5. Why can’t all phones use the Uconnect® Access App? Your Key Fob will sound the horn and flash the App? The Uconnect®...
Page 121: Via Mobile Apps
• Launch Pandora® using Voice Recognition (VR) via a pandora.com. button on the steering wheel. • Customers can also create a new Pandora® account by clicking on a link from the Uconnect® Access Via Mobile profile page during registration and setup.
Page 122 Pandora® Via Mobile. screen. The Uconnect® Access app is compatible with select iPhone® and Android smartphones. Visit 1. If you haven’t yet registered with Uconnect® Access, UconnectPhone.com to confirm that your smart- begin by pushing the “Apps” icon on the touchscreen phone is compatible with Uconnect®.
Page 123 122 ALL ABOUT Uconnect® ACCESS 5. Launch the Uconnect® Access app on your connected smartphone and log in with your Mopar Owner Connect Username/Email and password. From the vehicle touchscreen press the “Apps” button and select Pandora® from the list. Pandora® is located within the “All Apps”...
Page 124 ALL ABOUT Uconnect® ACCESS 123 Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®.
Page 125 124 ALL ABOUT Uconnect® ACCESS A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content. Press “OK” to continue or the “X” to exit. NOTE: Many smartphones have a limit to how much data they can utilize before incurring additional charges.
Page 126 • Your connected smartphone must be in range of a usable cellular signal. Give it a try! • Vehicle must be registered with Uconnect® Access and 1. From the vehicle touchscreen select Pandora® from have an active subscription that includes the appli-...
Page 127 126 ALL ABOUT Uconnect® ACCESS • Vehicle must be equipped with Uconnect 8.4A/8.4AN. The Uconnect® Access App must be open and you Not available on Uconnect 5.0. must be logged in. A blue light indicates that it’s providing data to the vehicle.
Page 128 Pandora® app on your smartphone 6. Can I create a station from within the vehicle using to use Pandora® Via Mobile. The Uconnect® Access the vehicle touchscreen? Custom content can only be App is required, however.
Page 129 • Customers can also create a new iHeartRadio account Via Mobile uses the Uconnect® Access smartphone app by clicking on a link from the Uconnect® Access Via and your smartphone’s data plan to access your personal Mobile profile page during registration and set-up.
Page 130 Mobile. UconnectPhone.com to confirm that your smart- phone is compatible with Uconnect®. Once you’ve 1. If you haven’t yet registered with Uconnect® Access, confirmed your smartphone is compatible, pair it to begin by pressing the “Apps” icon on the touchscreen the vehicle touchscreen via Bluetooth®...
Page 131 130 ALL ABOUT Uconnect® ACCESS Ensure that Via Mobile data has been turned on under “Settings” in the Uconnect® Access App. A green indica- tor next to the words “Via Mobile” will show when it is ready to provide data to the vehicle touchscreen (a blue indicator when data is being sent).
Page 132 Check your smartphone service plan for more details. Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®.
Page 133 132 ALL ABOUT Uconnect® ACCESS Give it a try! 1. From the vehicle touchscreen select iHeartRadio from the apps list, or push the button on the steering wheel and say, “launch iHeartRadio Via mobile.”...
Page 134 ALL ABOUT Uconnect® ACCESS 133 2. The app will launch, presenting you with a convenient 5. To find a local, live radio station, return to iHeartRadio interface to use while in your vehicle. You will have Home and select “Stations Near You.”...
Page 135 • Use the “Discovery Tuner” button on the touchscreen • Vehicle must be registered with Uconnect® Access and to change the variety of the station you are listening to. have an active subscription that includes the appli- Set the tuner to “Familiar,”...
Page 136 Radio, it may need to be updated on Mopar Owner 4. If I changed my password for iHeartRadio, do I have Connect under the “Via Mobile” section. to update it with Uconnect® Access? Yes. Visit Mopar Owner Connect moparownerconnect.com, log in, and click on Via Mobile.
Page 137 5. Can I create an iHeartRadio account during 9. How do I know how much data is being used? Uconnect® Access registration and set-up? There is a Uconnect® Access Via Mobile uses your smartphone’s link from the Via Mobile profile page where the existing data plan to stream content.
Page 138 • Leverage existing Slacker Radio account. Customer How It Works can set up a free or paid account on the Slacker Radio Via Mobile uses the Uconnect® Access smartphone app website at slacker.com. and your smartphone’s data plan to access your personal •...
Page 139 138 ALL ABOUT Uconnect® ACCESS 1. If you have not registered with Uconnect® Access, 4. Next, connect your smartphone to the vehicle touch- begin by pressing the “Apps” button on the touch- screen. The Uconnect® Access app is compatible with screen inside your vehicle, and then press “Uconnect...
Page 140 ALL ABOUT Uconnect® ACCESS 139 Ensure that Via Mobile data has been turned on under “Settings” in the Uconnect® Access App. A green indica- tor next to the words “Via Mobile” will show when it is ready to provide data to the vehicle touchscreen (a blue indicator when data is being sent).
Page 141 140 ALL ABOUT Uconnect® ACCESS Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content.
Page 142 ALL ABOUT Uconnect® ACCESS 141 Give it a try! 1. From the vehicle touchscreen select Slacker Radio from the apps list, or push the button on the steering wheel and say, “launch Slacker Via Mo- bile.”...
Page 143 142 ALL ABOUT Uconnect® ACCESS • Vehicle must be registered with Uconnect® Access and 2. Select Slacker Radio Stations have an active subscription that includes the appli- 3. Select Top Stations > Today’s Hits cable feature or App. Your chosen station will play. Use the “Heart” and “Ban”...
Page 144 The Uconnect® Access App must be open and you ing a song you previously liked. When you see it must be logged in. A blue light indicates that it’s appear in yellow, you do not need to “like”...
Page 145 5. Can I create a Slacker Radio account during 8. Should I have the Slacker Radio app downloaded to Uconnect® Access registration and set-up? There is a my smartphone to use Uconnect® Access Via Mo- link from the Via Mobile profile page where the bile? You do not need to have the Slacker Radio app customer can go to Slacker Radio’s website to create a...
Page 146 (aharadio.com), or through the Aha™ mobile How It Works app. Via Mobile uses the Uconnect® Access smartphone app • “Like” and “Dislike” buttons on the touchscreen are and your smartphone’s data plan to access your personal available to refine songs being played on the station.
Page 147 146 ALL ABOUT Uconnect® ACCESS 1. If you have not yet registered with Uconnect® Access, 4. Next, connect your smartphone to the vehicle touch- begin by pressing the “Apps” icon on the touchscreen screen. The Uconnect® Access app is compatible with inside your vehicle, then pressing “Uconnect Registra-...
Page 148 ALL ABOUT Uconnect® ACCESS 147 Ensure that Via Mobile data has been turned on under “Settings” in the Uconnect® Access App. A green indica- tor, next to the words “Via Mobile,” will show when it is ready to provide data to the vehicle touchscreen (a blue indicator when data is being sent).
Page 149 148 ALL ABOUT Uconnect® ACCESS Each time you want to use a Via Mobile app in your vehicle, the Uconnect® Access App must be running on your smartphone and the smartphone must be paired via Bluetooth®. A message will be displayed to remind you that Via Mobile apps utilize the data plan on your connected smartphone to provide content.
Page 150 ALL ABOUT Uconnect® ACCESS 149...
Page 151 150 ALL ABOUT Uconnect® ACCESS • Nearby – Search for POIs from the following catego- Give it a try! ries: Hungry, Coffee, Hotels, Weather 1. From the vehicle touchscreen select Aha™ from the • Settings – Designate preference to allow explicit...
Page 152 FAQs usable cellular signal. 1. Why can’t I get Aha™ Via Mobile to work? Here are • Vehicle must be registered with Uconnect® Access and some things to consider: • Check to ensure you have linked your Aha™ account have an active subscription that includes the appli- cable feature or app.
Page 153 152 ALL ABOUT Uconnect® ACCESS • If you recently changed your password for Aha™, it 4. How do I sync my Aha™ account with Facebook®, may need to be updated on Mopar Owner Connect Twitter® and Slacker? Associate your Aha™ account under the “Via Mobile”...
Page 154 ALL ABOUT Uconnect® ACCESS 153 6. Why can’t I get Aha™ Via Mobile to work? Ensure 9. Can I create an Aha™ account during Uconnect® you have registered for Uconnect® Access and asso- Access registration and setup? There is a link from the...
Page 155: Account
Please refer to your device carrier for specific details. MAINTAIN MY Uconnect® ACCESS ACCOUNT Reinstalling An App From the in-vehicle touchscreen do the following: 1. Press the Uconnect® “App” button and open the Uconnect® Store. Select “My Apps.”...
Page 156 ALL ABOUT Uconnect® ACCESS 155 2. In “My Apps,” select “Settings” and then “Reinstall App” and “Continue.”...
Page 157 156 ALL ABOUT Uconnect® ACCESS...
Page 158 ALL ABOUT Uconnect® ACCESS 157 3. Your Apps have been successfully re-installed. Connect website (moparownerconnect.com). On Mopar Owner Connect, go to Uconnect® Store, and click on “Remove My Vehicle.” For further assistance call Uconnect® Care at 855- 792-4241. 1. Press the Uconnect® “Apps” button and open the Uconnect®...
Page 159 158 ALL ABOUT Uconnect® ACCESS 2. In “My Apps”, select “Settings” and then “Remove Uconnect® Account” and “Continue.”...
Page 160 ALL ABOUT Uconnect® ACCESS 159...
Page 161 Uconnect® Care on your in-vehicle touchscreen to contact Uconnect® Care. Your call will be directed to a Uconnect® Care agent or held in a queue until an agent is available. You can also phone Uconnect® Care directly at 855-792-4241, or go to the Mopar Owner Connect website (moparownerconnect.com).
Page 162 (moparownerconnect.com) with your username and password. Select Edit Profile > Uconnect® Payment 3. How Do I Create A Uconnect® Security PIN? Set up Account to create an account (and PIN) (if you have a your Uconnect® Security PIN during the registration Uconnect®...
Page 163 162 ALL ABOUT Uconnect® ACCESS 7. What If I Forgot My Uconnect® Payment PIN? The b. Make your edits and click “Save.” next time you are asked for your Uconnect® Payment 10. Can I Try Apps, Features Or Packages Before I Buy PIN, select “Forgot PIN?”...
Page 164 App and package PIN and complete the process. subscriptions from your in-vehicle touchscreen, se- You can also go to the Uconnect® Store online at lect Apps > All Apps > Uconnect® Store > My Apps. Mopar Owner Connect (moparownerconnect.com), select the Shop tab,...
Page 165 My Subscription? From your in-vehicle touchscreen in-vehicle touchscreen, select Apps > All Apps > > select Apps > All Apps >Uconnect® Store > My Uconnect® Store > My Apps > Settings > Remove Apps and choose a subscription to view its expiration Uconnect®...
Page 166 To reinstall an App from the Uconnect® Care at 855-792-4241. in-vehicle touchscreen, press Apps > All Apps > Uconnect® Store > My Apps > Settings > Reinstall 29. I Am Trading My Vehicle In. Can I Transfer Apps Apps > Continue.
Page 167: Safety Guidelines
Uconnect® features and applications in this ve- Safe Usage Of The Uconnect® Access System hicle. Only use Uconnect® when it is safe to do so. Failure to do so may result in an accident involv- • Read all instructions in this manual carefully before ing serious injury or death.
Page 168 ALL ABOUT Uconnect® ACCESS 167 NOTE: Many features of this system are speed depen- isopropyl alcohol and water solution ratio of 50:50. Be dent. For your own safety, it is not possible to use some sure to follow the solvent manufacturer’s precautions of the touchscreen features while the vehicle is in motion.
Page 169 168 ALL ABOUT Uconnect® ACCESS Modifications not expressly approved by the radio Increase the separation between the equipment and re- manufacturer could void the user’s authority to operate ceiver. the equipment. Consult the dealer or an experienced radio technician for help.
Page 170: Uconnect
ALL ABOUT Uconnect® ACCESS 169 • Multiple devices may be connected at one time. For The internal wireless radio operates within guidelines found in radio frequency safety standards and recom- example, a phone can be paired and connected for mendations, which reflect the consensus of the scientific hands-free calling and texting, while a USB media community.
Page 171 170 ALL ABOUT Uconnect® ACCESS • Current audio (AM/FM/SXM/AUX) will continue to • When connecting a second device via USB, that device play when switching to a non-media type App. will have priority and auto play accordingly. A phone that is already paired/connected will still be available •...
Page 172 RADIO MODE ......174 Uconnect® PHONE .....195 ▫...
Page 173 172 Uconnect® 8.4A — If Equipped ▫ Information......272 NAVIGATION ......224 ▫...
Page 174 Refer to Climate Controls in your vehicles Owner’s Manual for further details. 5. Nav (If Equipped) 1. Radio The Uconnect® 8.4A System is Navigation-Capable for Press the “Radio” button on the touchscreen to enter dealer activation. Radio Mode. The different tuner modes; AM, FM and SXM can be selected by pressing the corresponding buttons on the touchscreen in Radio Mode.
Page 175 174 Uconnect® 8.4A — If Equipped 6. Phone 10. SCREEN OFF Press the “Phone” button on the touchscreen to access the Push the SCREEN OFF button to turn the touchscreen Uconnect® Phone feature. OFF. To turn the screen back ON, just press the screen.
Page 176 Uconnect® 8.4A — If Equipped 175 VOLUME/MUTE Control Screen Close Push the VOLUME/MUTE control knob to mute the The “X” button on touchscreen, located at the top right, radio. Push the VOLUME/MUTE control knob a second provides a means to close the Direct Tune Screen. The time to unmute the radio.
Page 177 176 Uconnect® 8.4A — If Equipped radio reaches the starting station after passing through Fast Seek Down the entire band two times, the radio will stop at the Press and hold the “Seek Down” button on the station where it began.
Page 178 Uconnect® 8.4A — If Equipped 177 Undo When you are receiving a station that you wish to commit into memory, press and hold the desired num- You can backspace an entry by pressing the “Undo” bered button on the touchscreen for more that two button on touchscreen.
Page 179 178 Uconnect® 8.4A — If Equipped Scrolling Preset List Return To Main Radio Screen Once in the Browse Presets screen, you can scroll the You can return to the Main Radio Screen, by pressing the preset list by rotation of the TUNE/SCROLL knob, or by “X”...
Page 180 Uconnect® 8.4A — If Equipped 179 Latino, offering 20 channels of commercial free music, related marks and logos are trademarks of Sirius XM news, talk, comedy, sports and more dedicated to Span- Radio Inc. Service available Canada; ish language programming.
Page 181 180 Uconnect® 8.4A — If Equipped • The SiriusXM function buttons on the touchscreens are Acquiring SiriusXM Subscription displayed below the Program Information. To activate the SiriusXM Satellite Radio subscription, call 1-800-643-2112 for U.S. residents and 1-877-438-9677 for Tuning is done by operating the TUNE/SCROLL knob or Canadian residents.
Page 182 Uconnect® 8.4A — If Equipped 181 You can exit by pressing the “Replay” button on the of the content can only be done when the content is touchscreen, any time during the Replay mode. previously rewound, and therefore, can not be done for live content.
Page 183 182 Uconnect® 8.4A — If Equipped The favorites feature enables you to set a favorite artist, This Screen contains many sub menus. You can exit a sub or song that is currently playing. The Radio then uses this menu to return to a parent menu by pressing the “Back information to alert you when either the favorite song, or Arrow.”...
Page 184 Uconnect® 8.4A — If Equipped 183 Presets Deleting A Preset Press the “Presets” button located at the left of the A Preset can be deleted in the Presets Browse screen by Browse screen. pressing the “Trash Can” Icon for the corresponding Preset.
Page 185 184 Uconnect® 8.4A — If Equipped Remove Favorites On Air Press the “Remove Favorites” tab at the top of the screen. Press the “On-Air” tab at the top of the screen. The Press the “Delete All” button on the touchscreen to delete On-Air list provides a list of Channels currently airing all of the Favorites or press the “Trash Can”...
Page 186 Uconnect® 8.4A — If Equipped 185 Alert Settings Balance/Fade Press the “Alert Setting” tab at the top of the screen. The Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update”...
Page 187 186 Uconnect® 8.4A — If Equipped Equalizer Speed Adjusted Volume Press the “Equalizer” button on the touchscreen to acti- Press the “Speed Adjusted Volume” button on the touch- vate the Equalizer screen. screen to activate the Speed Adjusted Volume screen.
Page 188 Uconnect® 8.4A — If Equipped 187 the audio volume with variation to vehicle speed. Vol- A “Insert Disc” message will be displayed on the screen ume increases automatically as speed increase to com- in the Disc mode when a Disc is not present in the Radio.
Page 189 188 Uconnect® 8.4A — If Equipped shows items and it’s sub-functions, which can be scrolled Info by pressing the “Up” and “Down” buttons to the right. Press the “Info” button on the touchscreen to display the The TUNE/SCROLL knob can also be used to scroll.
Page 190 Uconnect® 8.4A — If Equipped 189 USB/iPod® Mode contents of the USB device/iPod®. If supported by the device, you can browse by Folders, Artists, Playlists, Overview Albums, Songs, etc. Press the desired button on the left USB/iPod® Mode is entered by either inserting a USB side of the screen.
Page 191 190 Uconnect® 8.4A — If Equipped Shuffle the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track. Press the “Shuffle” button on the touchscreen to play the selections on the USB/iPod® device in random order to Pressing the “trks”...
Page 192 Uconnect® 8.4A — If Equipped 191 ON and the radio ON, the unit will switch to AUX mode Audio and begin to play when you insert the device cable. Refer to Radio Mode for adjusting the audio settings. Controlling The Auxiliary Device SD Card Mode —...
Page 193 192 Uconnect® 8.4A — If Equipped Browse Repeat Press the “Browse” button on the touchscreen to display Press the “Repeat” button on the touchscreen to toggle the browse window. The left side of the browse window the repeat functionality. The Repeat button on the touch- displays a list of ways you can browse through the screen is highlighted when active.
Page 194 Before proceeding, the Bluetooth® device must be paired Pressing the “trks” button on the touchscreen while the to the Uconnect® Phone to communicate with the pop up is displayed will close the pop up. Uconnect® System. NOTE: See the pairing procedure in the Uconnect®...
Page 195 194 Uconnect® 8.4A — If Equipped To access Bluetooth® mode, press the “Bluetooth®” current selection, or return to the beginning of the button on the left side of the display. previous selection if the Bluetooth® device is within the first second of the current selection.
Page 196 Uconnect® 8.4A — If Equipped 195 • Hands-Free Text Message Reply. (Forward one of 18 Audio pre-defined SMS messages to incoming calls/text Refer to Radio Mode for adjusting the audio settings. messages). Uconnect® PHONE • Redialing last dialed numbers (“Redial”).
Page 197 Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically • Dialing via Keypad using touchscreen. mute your radio when using the Uconnect® Phone. • Viewing and Calling contacts from Phonebooks dis- For Uconnect® customer support: played on the touchscreen.
Page 198 Uconnect® Phone works no matter where you stow your want to send Tones or make another call. mobile phone (be it your purse, pocket, or briefcase), as...
Page 199 198 Uconnect® 8.4A — If Equipped • Prior to giving a voice command, one must wait for the The Uconnect® Phone is fully integrated with the vehi- cle’s audio system. The volume of the Uconnect® Phone beep, which follows the “Listen” prompt or another can be adjusted either from the radio volume control prompt.
Page 200 The system handles multiple inputs in the same phrase To activate the Uconnect® Phone from idle, simply push or sentence such as “make a phone call” and “to Kelly the Phone button on your steering wheel and say a Smith.”...
Page 201 Pair (Link) Uconnect® Phone To A Mobile Phone To begin using your Uconnect® Phone, you must pair your compatible Bluetooth® enabled mobile phone. Mo- bile phone pairing is the process of establishing a wire-...
Page 202 4. Search for available devices on your Bluetooth® en- abled mobile phone. 6. Uconnect® Phone will display an in progress screen • Press the Settings button on your mobile phone. while the system is connecting. • Select Bluetooth® and ensure it is enabled. Once 7.
Page 203 Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect® system at a time. If “No” is selected, simply select “Uconnect” from the mobile phone/ audio device Bluetooth® screen, and the Uconnect®...
Page 204 4. Search for available devices on your Bluetooth® en- the Phone main screen, abled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® 2. Next, press the “Phone/Bluetooth®” button on the screen, touchscreen, 5.
Page 205 204 Uconnect® 8.4A — If Equipped You can also use the following VR commands to bring up 6. Uconnect® Phone will display an in process screen the Paired Phone screen from any screen on the radio: while the system is connecting, •...
Page 206 2. Press the “Paired Phones” or “Paired Audio Devices” Audio Device After Pairing button on the touchscreen. Uconnect® Phone will automatically connect to the high- 3. Press the settings icon button located to the right of the est priority paired phone and/or Audio Device within device name.
Page 207 5. Press the “Make Favorite” button on the touchscreen; supported, begins as soon as the Bluetooth® wireless you will see the chosen device move to the top of the phone connection is made to the Uconnect® Phone, for list. example, after you start the vehicle.
Page 208 Managing Your Favorites per contact will be downloaded and updated every There are three ways you can add an entry to your time a phone is connected to the Uconnect® Phone. Favorites. • Depending on the maximum number of entries down- 1.
Page 209 The following features can be accessed through the You will then be asked which contact and number to Uconnect® Phone if the feature(s) are available and choose from your mobile phonebook. When complete supported by Bluetooth® on your mobile service plan.
Page 210 • Favorites say “Call John Doe Mobile.” • Mobile Phonebook 3. The Uconnect® Phone will dial the number associated • Recent Call Log with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe.
Page 211 210 Uconnect® 8.4A — If Equipped Call Controls Touch-Tone Number Entry The touchscreen allows you to control the following call 1. Press the “Phone” button on the touchscreen. features: 2. Press the “Dial” button on the touchscreen. • Answer 3. The Touch-Tone screen will be displayed.
Page 212 You may browse up to 31 of the most recent of each of the following call types: When you receive a call on your mobile phone, the Uconnect® Phone will interrupt the vehicle audio sys- • All Calls tem. Push the Phone button on the steering wheel to •...
Page 213 212 Uconnect® 8.4A — If Equipped NOTE: The Uconnect® Phone compatible phones in the Toggling Between Calls market today do not support rejecting an incoming call If two calls are in progress (one active and one on hold), when another call is in progress. Therefore, the user can press the “Swap”...
Page 214 “Redial.” 1. Push the Phone button to begin. The Uconnect® Phone will call the last number that was dialed from your mobile phone. 2. After the “Listening” prompt and the following beep, say “Roadside Assistance” or say “Towing Assis- Call Continuation tance.”...
Page 215 You can also send stored mobile phonebook entries as tones for fast and easy access to voice mail and pager You can use your Uconnect® Phone to access a voice mail entries. For example, if you previously created a Phone- system or an automated service, such as a paging service book entry with First and/or Last Name as “Voicemail...
Page 216 Uconnect® 8.4A — If Equipped 215 NOTE: command immediately. For example, if a prompt is asking “There are two numbers with the name John. • The first number encountered for that contact will be Say the full name” you could push the Voice Com- sent.
Page 217 Uconnect® Phone. The voice-operated systems when possible and that you status is given for network signal strength and phone become aware of applicable laws that may affect the battery strength.
Page 218 NOTE: Certain brands of mobile phones do not send the without terminating the call. To transfer an ongoing call dial ring to the Uconnect® Phone to play it on the vehicle from your connected mobile phone to the Uconnect® audio system, so you will not hear it. Under this situa- Phone or vice versa, press the “Transfer”...
Page 219 218 Uconnect® 8.4A — If Equipped • Always wait for the beep before speaking. Even though the system is designed for many languages and accents, the system may not always work for some. • Speak normally, without pausing, just as you would...
Page 220 • Fully Closed Windows in an accident involving serious injury or death. • Dry Weather Conditions Once your Uconnect® system is paired with a compatible • Operation From The Driver’s Seat mobile device, the system can announce a new incoming...
Page 221 220 Uconnect® 8.4A — If Equipped Here’s how: Push the “Uconnect® Phone” button “Yes.” “I’m on my “Are there wait for the beep, then say “reply.” Uconnect® will way.” yet?” give the following prompt: “Please say the message “No.” “I’ll be late.”...
Page 222 Failure to do so may result 2. An active Uconnect® Access trial or paid subscription. in an accident involving serious injury or death. Press the “Apps” button on the lower right hand...
Page 223 2. Wait for the beep, your message will be truncated.” 3. Say “Text.” 8. Uconnect® will then repeat the message back to you. 4. Uconnect® will prompt you “Say the phone number, 9. Uconnect® will prompt you: To add to your message, or full name and phone type of the contact you want say “Continue”;...
Page 224 See recent text messages listed by number on Uconnect® screen “Listen to/view (message number four, for example)” Hear messages or read it on Uconnect® screen “Reply” Send a voice text reply to a current message “Forward text/message to ‘John Smith”...
Page 225 Bluetooth® ON mode. Navigation Registration (Uconnect® 8.4A Only) Power-Up Uconnect® 8.4A is Navigation-capable for dealer activa- After switching the ignition key from OFF to either the tion. See dealer for details. ON or ACC position, or after a language change, you must wait at least 15 seconds prior to using the system.
Page 226 Uconnect® 8.4A — If Equipped 225 • Press “Where To?” to find or route to a destination. Main Menu • Press “View Map” to view the map. • Press “Information” to view Traffic, Where Am I? and Trip Computer information.
Page 227 226 Uconnect® 8.4A — If Equipped Where To? Address Press this button on the touchscreen to search by a street address or a street name with house number. Recent Press this button on the touchscreen to access previously routed addresses or locations.
Page 228 Uconnect® 8.4A — If Equipped 227 Intersection Point on Map Press this button on the touchscreen to enter in two street Press this button on the touchscreen to select a destina- names as a destination. tion directly from the Map screen. By selecting a street...
Page 229 228 Uconnect® 8.4A — If Equipped Closest City Where To? — Address Press this button on the touchscreen to route to a nearby To enter a destination by Address, follow these steps: city. The screen will display an alphabetical listing of 1.
Page 230 Uconnect® 8.4A — If Equipped 229 2. Press “Spell City” or “Spell Street” to begin entering If you press “Spell Street,” you will have to enter and the address of your destination. select/press the desired street name in the correct city and then you will have to enter the house number.
Page 231 230 Uconnect® 8.4A — If Equipped Once the correct City, Street and Number has been If you are currently on a route guidance and you select entered, you will be asked to confirm your destination Recent, the system will ask you to choose one of the by pressing “OK.”...
Page 232 Uconnect® 8.4A — If Equipped 231 Where To? — Recent 2. Press the button on the touchscreen with the name of the desired destination. To route to a Recent destination, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
Page 233 232 Uconnect® 8.4A — If Equipped To delete a destination from the list, press the “Trash The following Options are available for each destination: Can Icon” button on the touchscreen. • Edit Name To display the options for a destination press the •...
Page 234 Uconnect® 8.4A — If Equipped 233 • Hotels/Motels • ATM/Banking • All POIs • Spell POI Name The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI)s.
Page 235 234 Uconnect® 8.4A — If Equipped You can also change your POI search area, by pressing the “Change Search Area” button on the touchscreen. You will have the following options to change your search area: • Around Me • In a City •...
Page 236 Uconnect® 8.4A — If Equipped 235 POI — Gas Stations 2. Press the “Gas Stations” button on the touchscreen. To select a Gas Station POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of...
Page 237 236 Uconnect® 8.4A — If Equipped You can search for a gas station by the following 3. Press the desired Gas Station and press “Yes” to categories, which are button tabs at the top of the confirm the destination. screen.
Page 238 Uconnect® 8.4A — If Equipped 237 POI — Restaurants 2. Press the “Restaurants” button on the touchscreen. To select a Restaurant POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest”...
Page 239 238 Uconnect® 8.4A — If Equipped 3. Press the desired Restaurant and press “Yes” to con- POI — Hotels/Motels firm the destination. To select a Hotel or Motel POI, follow these steps: If you are currently on a route guidance and you select a 1.
Page 240 Uconnect® 8.4A — If Equipped 239 • Type 2. Press the “Hotels/Motels” button on the touchscreen. • ABC (Search) 3. Press the desired hotel or motel and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a...
Page 241 240 Uconnect® 8.4A — If Equipped POI — ATM/Banking To select a ATM or Bank POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
Page 242 Uconnect® 8.4A — If Equipped 241 3. Press the desired ATM or Bank and press “Yes” to All POIs confirm the destination. To select a POI type, follow these steps: If you are currently on a route guidance and you select an 1.
Page 243 242 Uconnect® 8.4A — If Equipped • Automotive 2. Press “All POIs” button on the touchscreen. • Coffee Shops • Community • Entertainment • Gas Stations • Health and Beauty • Highway Exit • Hospital • Hotels/Motels • Other • Parking •...
Page 244 Uconnect® 8.4A — If Equipped 243 4. Press the desired POI and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: •...
Page 245 244 Uconnect® 8.4A — If Equipped POI — Spell Name 2. Press the “Spell Name” button on the touchscreen. To select for a specific POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest”...
Page 246 Uconnect® 8.4A — If Equipped 245 If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow”...
Page 247 246 Uconnect® 8.4A — If Equipped 3. To delete a destination from the list, press the “Trash If you are currently on a route guidance and you select a Can Icon” button on the touchscreen. Favorite, the system will ask you to choose one of the following: 4.
Page 248 Uconnect® 8.4A — If Equipped 247 Where To? — Intersection 2. Press the “Spell Intersection” button on the touch- screen. To enter a destination by Intersection, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
Page 249 248 Uconnect® 8.4A — If Equipped 3. If you press “Spell City,” enter and press the desired 4. Once the correct City and Intersection has been en- city name, followed by the desired street name, then tered, you will be asked to confirm your destination.
Page 250 Uconnect® 8.4A — If Equipped 249 Where To? — Go Home If there is no Home Address entered, press “Yes” to enter it now. To enter your Home Address, follow these steps: 2. To set your set your Home Address choose one of the 1.
Page 251 250 Uconnect® 8.4A — If Equipped Once you have generated your Home Address, you will 2. Press the “Options” button at the bottom of the be asked to Save it. displayed map. 3. Press the “Save” button on the touchscreen to confirm 3.
Page 252 Uconnect® 8.4A — If Equipped 251 Where To? — Trips 2. Press the “Trips” button on the touchscreen. To route to a saved Trip, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Recent”...
Page 253 252 Uconnect® 8.4A — If Equipped • Phone Number To add a Trip, follow these steps: 1. Press the “Create new Trip” button on the touchscreen. NOTE: Refer to the individual section of the chosen option for further information. 2. Type in the new Trip Name.
Page 254 Uconnect® 8.4A — If Equipped 253 • Move Down in the list NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — GEO Coordinate To route to a saved Trip, follow these steps: 1.
Page 255 254 Uconnect® 8.4A — If Equipped 5. Press “OK” to confirm the destination. 6. Press the “Yes” button on the touchscreen to confirm your destination and begin your route. If you are currently on a route guidance and you select a...
Page 256 Uconnect® 8.4A — If Equipped 255 Where To? — Point on Map 2. Use the touchscreen to drag the center of the cross over the desired destination. To enter a destination by Point on Map, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
Page 257 256 Uconnect® 8.4A — If Equipped 4. Press the “Yes” button on the touchscreen to confirm Where To? — City Center your destination and begin your route. To enter a destination by City Center, follow these steps: If you are currently on a route guidance and you select a 1.
Page 258 Uconnect® 8.4A — If Equipped 257 If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination •...
Page 259 258 Uconnect® 8.4A — If Equipped 2. Press the desired city from the list. 3. Press the “Yes” button on the touchscreen to confirm your destination and begin your route.
Page 260 Uconnect® 8.4A — If Equipped 259 If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination •...
Page 261 260 Uconnect® 8.4A — If Equipped Where To? — Phone 2. Enter the Phone Number of the destination you would like to route to. To enter a destination by Phone number, follow these steps: 3. Press the desired destination from the list.
Page 262 Uconnect® 8.4A — If Equipped 261 Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings. • Options – Press the “Options” button on the touch- screen to display a list of options to alter your route.
Page 263 262 Uconnect® 8.4A — If Equipped • Save – Press the “Save” button on the touchscreen to save the destination as a Favorite. Press the “Yes” button on the touchscreen to confirm your destination and to start your route guidance.
Page 264 Uconnect® 8.4A — If Equipped 263 Zoom In +/ Zoom Out – Press the Zoom In (+) or Zoom Out (–) buttons on the touchscreen to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels.
Page 265 264 Uconnect® 8.4A — If Equipped • Settings Turn List (only during route guidance) Press this button on the touchscreen to view all the Press the area in the upper center part of the screen that available settings. See View Map – Settings for more displays your next turn to see a Turn List for your current information.
Page 266 Uconnect® 8.4A — If Equipped 265 Where Am I? Press the area in the lower center part of the screen that displays your current location to view the Where Am I? view. Where Am I? displays the address and GEO Coordinates of your current location.
Page 267 266 Uconnect® 8.4A — If Equipped View Map — Settings The following Map Settings are available: • Map Setup — Press this button on the touchscreen to display items to customize how your map is viewed. Settings – Map Setup for more information.
Page 268 Uconnect® 8.4A — If Equipped 267 • GPS — Press this button on the touchscreen to change Copy device information to USB? (If Equipped) — the GPS display. Press the desired button on the Press this button on the touchscreen to copy your radio touchscreen.
Page 269 268 Uconnect® 8.4A — If Equipped • Current Street • AutoZoom Press this button on the touchscreen to turn on/off the Press this button on the touchscreen to change how the current street display on the lower center of the Map AutoZoom feature adjust the zoom level during guid- View.
Page 270 Uconnect® 8.4A — If Equipped 269 • Show POI Icons • Park Areas Press this button on the touchscreen to show the selected Press this button on the touchscreen to display Park Point of Interest icons while in Map View. Press and Areas while in Map View.
Page 271 270 Uconnect® 8.4A — If Equipped • River Names The following Guidance options are available. • Play Voice Guidance Prompts Press this button on the touchscreen to display River Names while in Map View. Press and release the button Press this button on the touchscreen to enable Voice on the touchscreen until a check-mark appears, showing Guidance Prompts during route guidance.
Page 272 Uconnect® 8.4A — If Equipped 271 • Junction View Automatic By Delay Time Press this button on the touchscreen to enable Junction Manual View during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.
Page 273 272 Uconnect® 8.4A — If Equipped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information From the Nav Main Menu, press the “Information”...
Page 274 Uconnect® 8.4A — If Equipped 273 Information — Where Am I? To select “Where Am I?” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. Where Am I? displays the address and GEO Coordi- nates of your current location.
Page 275 274 Uconnect® 8.4A — If Equipped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information — Trip Computer To select “Trip Computer” information, follow these steps: 1.
Page 276 Uconnect® 8.4A — If Equipped 275 • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the ‘X’...
Page 277 276 Uconnect® 8.4A — If Equipped • Fire Department – Search and route a Fire Department Press the “Location” button on the touchscreen to display close to your current location your exact current location. Press the “Save” button on the touchscreen to save your current location in Favorites.
Page 278 Uconnect® 8.4A — If Equipped 277 Emergency — Hospital 2. Press the “Hospital” button on the touchscreen. To search for a Hospital close to your current location, follow these steps: 1. While in the Nav Main Menu, press the “Emergency”...
Page 279 278 Uconnect® 8.4A — If Equipped NOTE: In case of emergency, please contact the facility to Emergency — Police verify their availability before proceeding. To search for a Police Station close to your current location, follow these steps: 3. Press the desired Hospital and press “Yes” to confirm the destination.
Page 280 Uconnect® 8.4A — If Equipped 279 2. Press the “Police” button on the touchscreen. NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Police Station and press “Yes” to confirm the destination.
Page 281 280 Uconnect® 8.4A — If Equipped Emergency — Fire Department 2. Press the “Fire Department” button on the touch- screen. To search for a Fire Departmentclose to your current location, follow these steps: 1. While in the Nav Main Menu, press the “Emergency”...
Page 282 Roadside Fire Department the system will ask you to choose one of Assistance, Uconnect® Care and Vehicle Care by pressing the following: the “Assist” button on the Rearview Mirror of your vehicle.
Page 283 You can choose to press the “9-1-1 Call” button on To provide Uconnect® Services to you, we may record the Rearview Mirror to contact a 9-1-1 operator. and monitor your conversations with Roadside Assis- 9–1–1 Call Operating Instructions...
Page 284 Uconnect® 8.4A — If Equipped 283 2. The LED light on the Rearview Mirror will turn green NOTE: Once a connection is made between the vehicle’s once a connection to a 9-1-1 operator has been made; 9-1-1 Call system and the 9-1-1 operator, the 9-1-1 opera- tor may be able to open a voice connection with the 3.
Page 285 284 Uconnect® 8.4A — If Equipped 6. If a connection between the vehicle and a 9-1-1 opera- WARNING! (Continued) tor is made, the 9-1-1 Call system may transmit certain or location), do not wait for voice contact from a vehicle information to a 9-1-1 operator, including the last known GPS coordinates of your vehicle.
Page 286 Uconnect® 8.4A — If Equipped 285 9-1-1 Call System Limitations WARNING! Vehicles sold in Canada and Mexico DO NOT have 9-1-1 • Ignoring the Rearview Mirror light could mean you Call system capabilities. may not have 9-1-1 Call capability if needed. If the...
Page 287 286 Uconnect® 8.4A — If Equipped • Operator error by the 9-1-1 operator. Even if the 9-1-1 Call system is fully functional, factors beyond Chrysler Group LLC’s control may prevent or • Wireless network congestion. stop 9-1-1 Call system operation. These include, but are •...
Page 288 Uconnect® 8.4A — If Equipped 287 REMOTE SERVICE FEATURES WARNING! If your vehicle is equipped with Remote Service Features, Failure to perform scheduled maintenance and for more information, refer to moparownerconnect.com regularly inspect your vehicle may result in ve- or call 855-792-4241 for U.S. residents and 855-209-8317 hicle damage and/or serious injury.
Page 290 RADIO MODE ......292 Uconnect® PHONE .....314 ▫...
Page 291 290 Uconnect® 8.4AN — If Equipped ▫ Getting Started ..... . .339 SiriusXM TRAFFIC — U.S. MARKET ONLY (AVAILABLE ON 8.4AN — IF EQUIPPED) ..398 ▫...
Page 292 Uconnect® 8.4AN — If Equipped 291 Uconnect® 8.4AN SYSTEM 2. Media Press the “Media” button on the touchscreen to access media sources such as: Disc (If Equipped), USB Device, AUX, Bluetooth®, and SD Card (If Equipped) as long as the requested media is present.
Page 293 292 Uconnect® 8.4AN — If Equipped 6. Phone 10. SCREEN OFF Press the “Phone” button on the touchscreen to access the Push the SCREEN OFF button to turn the touchscreen Uconnect® Phone feature. OFF. To turn the screen back ON, just press the screen.
Page 294 The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning HD Radio the VOLUME/MUTE control knob clockwise increases HD Radio technology (available on Uconnect 8.4AN in the volume, and counterclockwise decreases it. the U.S. market) works similar to conventional radio TUNE/SCROLL Control except it allows broadcasters to transmit a high-quality digital signal.
Page 295 294 Uconnect® 8.4AN — If Equipped Seek And Direct Tune Functions stations or channels at a faster rate, the radio stops at the next available station or channel when the button The Seek Up and Down functions are activated by on the touchscreen is released.
Page 296 Uconnect® 8.4AN — If Equipped 295 Direct Tune Press the “Tune” button on the touchscreen located at the Once the last digit of a station has been entered, the bottom of the radio screen. The Direct Tune button on the...
Page 297 296 Uconnect® 8.4AN — If Equipped You can switch between the two radio presets by pressing When selected, the radio tunes to the station stored in the the “arrow button” located in the upper right of the radio Preset and returns to the main radio screen.
Page 298 Uconnect® 8.4AN — If Equipped 297 • MySXM – allowing you to personalize your favorite SiriusXM All Access Package music channels All satellite radio equipped vehicles come with a one year trial to the SiriusXM All Access package, providing Go to siriusxm.com/getallaccess for more information...
Page 299 298 Uconnect® 8.4AN — If Equipped This functionality is only available for radios equipped Canadian residents. You will need to provide the Siri- with a Satellite receiver. In order to receive satellite radio, usXM ID (RID) located at the bottom of the Channel 0 the vehicle needs to be outside with a clear view to the screen.
Page 300 Uconnect® 8.4AN — If Equipped 299 Tuning is done by operating the Tune Knob or by Direct Play/Pause Tune, similar to other Radio Bands, see Presets, browse, Press the “Pause/Play” button on the touchscreen to Tune Knob, and Direct Tune.
Page 301 300 Uconnect® 8.4AN — If Equipped the touchscreen also forwards the content. The Radio information to alert you when either the favorite song, or begins playing the content at the point at which the press favorite artist are being played at any time by any of the is release.
Page 302 Uconnect® 8.4AN — If Equipped 301 When the Traffic & Weather button on the touchscreen is Channel List pressed, the Traffic & Weather channel is tuned. Press the Channel List, or Genre, to display all the If the Traffic & Weather alert City is not set, you are SiriusXM Channel Numbers.
Page 303 302 Uconnect® 8.4AN — If Equipped You can scroll the Presets list pressing the up and down Favorites arrows located at the right side of the screen. Scrolling Press the “Favorites” button located at the left of the can also be done by operating the TUNE/SCROLL Knob Browse screen.
Page 304 Uconnect® 8.4AN — If Equipped 303 Alert Settings Select Teams Press the “Alert Setting” tab at the top of the screen. The Press the “Select Teams” button on the touchscreen to Alert Settings menu allows you to choose from a Visual activate the League Scroll list.
Page 305 304 Uconnect® 8.4AN — If Equipped Audio Balance/Fade Press the “audio” button on the touchscreen to activate the audio settings screen to adjust Balance\Fade, Equal- izer and Speed Adjusted Volume. You can return to the Radio screen by pressing the “X”...
Page 306 Uconnect® 8.4AN — If Equipped 305 Equalizer Speed Adjusted Volume Press the “Equalizer” button on the touchscreen to acti- Press the “Speed Adjusted Volume” button on the touch- vate the Equalizer screen. screen to activate the Speed Adjusted Volume screen.
Page 307 306 Uconnect® 8.4AN — If Equipped the audio volume with variation to vehicle speed. Vol- A “Insert Disc” message will be displayed on the screen ume increases automatically as speed increase to com- in the Disc mode when a Disc is not present in the Radio.
Page 308 Uconnect® 8.4AN — If Equipped 307 shows items and it’s sub-functions, which can be scrolled Info by pressing the “Up” and “Down” buttons to the right. Press the “Info” button on the touchscreen to display the The TUNE/SCROLL knob can also be used to scroll.
Page 309 308 Uconnect® 8.4AN — If Equipped USB/iPod® Mode contents of the USB device/iPod®. If supported by the device, you can browse by Folders, Artists, Playlists, Overview Albums, Songs, etc. Press the desired button on the left USB/iPod® Mode is entered by either inserting a USB side of the screen.
Page 310 Uconnect® 8.4AN — If Equipped 309 Shuffle the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track. Press the “Shuffle” button on the touchscreen to play the selections on the USB/iPod® device in random order to Pressing the “trks”...
Page 311 310 Uconnect® 8.4AN — If Equipped ON and the radio ON, the unit will switch to AUX mode Audio and begin to play when you insert the device cable. Refer to Radio Mode for adjusting the audio settings. Controlling The Auxiliary Device SD Card Mode —...
Page 312 Uconnect® 8.4AN — If Equipped 311 Browse Repeat Press the “Browse” button on the touchscreen to display Press the “Repeat” button on the touchscreen to toggle the browse window. The left side of the browse window the repeat functionality. The Repeat button on the touch- displays a list of ways you can browse through the screen is highlighted when active.
Page 313 TUNE/SCROLL knob to highlight a track (indicated Before proceeding, the Bluetooth® device must be paired by the line above and below the track name) and then to the Uconnect® Phone to communicate with the push the ENTER/BROWSE knob to start playing that Uconnect® System.
Page 314 Uconnect® 8.4AN — If Equipped 313 To access Bluetooth® mode, press the “Bluetooth®” current selection, or return to the beginning of the button on the left side of the display. previous selection if the Bluetooth® device is within the first second of the current selection.
Page 315 • Searching Contacts phone number (“Search for John Smith Mobile”). Voice Activated Features: • Voice Texting (Requires registration to Uconnect Ac- • Hands-Free dialing via Voice (“Call John Smith Mo- cess and a current subscription) bile” or, “Dial 248 555-1212”).
Page 316 Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically • Dialing via Keypad using touchscreen. mute your radio when using the Uconnect® Phone. • Viewing and Calling contacts from Phonebooks dis- For Uconnect® customer support: played on the touchscreen.
Page 317 Uconnect® Phone works no matter where you stow your want to send Tones or make another call. mobile phone (be it your purse, pocket, or briefcase), as...
Page 318 Uconnect® 8.4AN — If Equipped 317 • Prior to giving a voice command, one must wait for the The Uconnect® Phone is fully integrated with the vehi- cle’s audio system. The volume of the Uconnect® Phone beep, which follows the “Listen” prompt or another can be adjusted either from the radio volume control prompt.
Page 319 The system handles multiple inputs in the same phrase To activate the Uconnect® Phone from idle, simply push or sentence such as “make a phone call” and “to Kelly the Phone button on your steering wheel and say a Smith.”...
Page 320 Pair (Link) Uconnect® Phone To A Mobile Phone To begin using your Uconnect® Phone, you must pair your compatible Bluetooth® enabled mobile phone. Mo- bile phone pairing is the process of establishing a wire-...
Page 321 4. Search for available devices on your Bluetooth® en- abled mobile phone. 6. Uconnect® Phone will display an in progress screen • Press the Settings button on your mobile phone. while the system is connecting. • Select Bluetooth® and ensure it is enabled. Once 7.
Page 322 Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect® system at a time. If “No” is selected, simply select “Uconnect” from the mobile phone/ audio device Bluetooth® screen, and the Uconnect®...
Page 323 4. Search for available devices on your Bluetooth® en- the Phone main screen, abled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® 2. Next, press the “Phone/Bluetooth®” button on the screen, touchscreen, 5.
Page 324 Uconnect® 8.4AN — If Equipped 323 You can also use the following VR commands to bring up 6. Uconnect® Phone will display an in process screen the Paired Phone screen from any screen on the radio: while the system is connecting, •...
Page 325 Disconnecting A Phone Or Audio Device Audio Device After Pairing 1. Press the “Settings” button on the touchscreen. Uconnect® Phone will automatically connect to the high- 2. Press the “Paired Phones” or “Paired Audio Devices” est priority paired phone and/or Audio Device within button on the touchscreen.
Page 326 Uconnect® 8.4AN — If Equipped 325 3. Press the “Settings” button located to the right of the 5. Press the “Make Favorite” button on the touchscreen; device name for a different Phone or Audio Device you will see the chosen device move to the top of the than the currently connected device.
Page 327 • Automatic download and update of a phone book, if edited on the mobile phone. The changes are trans- supported, begins as soon as the Bluetooth® wireless ferred and updated to Uconnect® Phone on the next phone connection is made to the Uconnect® Phone, for phone connection.
Page 328 When complete the new favorite The following features can be accessed through the will be shown. Uconnect® Phone if the feature(s) are available and supported by Bluetooth® on your mobile service plan. To Remove A Favorite For example, if your mobile service plan provides three- 1.
Page 329 2. After the “Listening” prompt and the following beep, • SMS Message Viewer say “Call John Doe Mobile.” 3. The Uconnect® Phone will dial the number associated with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe.
Page 330 Uconnect® 8.4AN — If Equipped 329 Call Controls Touch-Tone Number Entry The touchscreen allows you to control the following call 1. Press the “Phone” button on the touchscreen. features: 2. Press the “Dial” button on the touchscreen. • Answer 3. The Touch-Tone screen will be displayed.
Page 331 You may browse up to 31 of the most recent of each of the following call types: When you receive a call on your mobile phone, the Uconnect® Phone will interrupt the vehicle audio sys- • All Calls tem. Push the Phone button on the steering wheel to •...
Page 332 Uconnect® 8.4AN — If Equipped 331 NOTE: The Uconnect® Phone compatible phones in the Toggling Between Calls market today do not support rejecting an incoming call If two calls are in progress (one active and one on hold), when another call is in progress. Therefore, the user can press the “Swap”...
Page 333 The Uconnect® Phone allows ongoing calls to be trans- the following beep, say “Redial.” ferred from your mobile phone to the Uconnect® Phone The Uconnect® Phone will call the last number that was without terminating the call. To transfer an ongoing call dialed from your mobile phone.
Page 334 Uconnect® 8.4AN — If Equipped 333 • Low-To-Medium Vehicle Speed Things You Should Know About Your Uconnect® Phone • Low Road Noise Voice Command • Smooth Road Surface For the best performance: • Fully Closed Windows • Adjust the rearview mirror to provide at least ½ inch •...
Page 335 WARNING! • Fully Closed Windows ALWAYS drive safely and obey all applicable laws. You should only use Uconnect® features • Dry Weather Conditions when it is safe to do so. Failure to do so may result • Operation From The Driver’s Seat...
Page 336 Uconnect® 8.4AN — If Equipped 335 Once your Uconnect® system is paired with a compatible “Yes.” “I’m on my “Are there mobile device, the system can announce a new incoming way.” yet?” text message, and read it to you over the vehicle audio “No.”...
Page 337 Failure to do so may result 2. An active Uconnect® Access trial or paid subscription. in an accident involving serious injury or death. Press the “Apps” button on the lower right hand...
Page 338 2. Wait for the beep, your message will be truncated.” 3. Say “Text.” 8. Uconnect® will then repeat the message back to you. 4. Uconnect® will prompt you “Say the phone number, 9. Uconnect® will prompt you: To add to your message, or full name and phone type of the contact you want say “Continue”;...
Page 339 See recent text messages listed by number on Uconnect® screen “Listen to/view (message number four, for example)” Hear messages or read it on Uconnect® screen “Reply” Send a voice text reply to a current message “Forward text/message to ‘John Smith”...
Page 340 Mobile phones have been found to lose connection to the user’s authority to operate the equipment. Uconnect® Phone. When this happens, the connection • This device may not cause harmful interference. can generally be re-established by switching the mobile phone OFF/ON.
Page 341 340 Uconnect® 8.4AN — If Equipped • Press “Where To?” to find or route to a destination. Main Menu • Press “View Map” to view the map. • Press “Information” to view Traffic, Where Am I? and Trip Computer information.
Page 342 Uconnect® 8.4AN — If Equipped 341 Where To? Address Press this button on the touchscreen to search by a street address or a street name with house number. Recent Press this button on the touchscreen to access previously routed addresses or locations.
Page 343 342 Uconnect® 8.4AN — If Equipped Intersection Point on Map Press this button on the touchscreen to enter in two street Press this button on the touchscreen to select a destina- names as a destination. tion directly from the Map screen. By selecting a street...
Page 344 Uconnect® 8.4AN — If Equipped 343 Closest City Press this button on the touchscreen to route to a nearby city. The screen will display an alphabetical listing of nearby cities. The navigation system will calculate a route with the destination at the center of the nearby city.
Page 345 344 Uconnect® 8.4AN — If Equipped To change the state and/or country, press the “state, country” button on the touchscreen and follow the prompts to change the state and/or country. If you press “Spell City,” you will have to enter and select/press the desired city name, followed by the desired street name then the house number.
Page 346 Uconnect® 8.4AN — If Equipped 345 3. Press the “Yes” button on the touchscreen to confirm If you are currently on a route guidance and you select your destination and begin your route. Recent, the system will ask you to choose one of the following: •...
Page 347 346 Uconnect® 8.4AN — If Equipped Where To? — Recent 2. Press the button on the touchscreen with the name of the desired destination. To route to a Recent destination, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
Page 348 Uconnect® 8.4AN — If Equipped 347 To display the options for a destination press the The following Options are available for each destination: “Options” button on the touchscreen that looks like a • Edit Name gear. • Add Phone Number •...
Page 349 348 Uconnect® 8.4AN — If Equipped • Hotels/Motels • ATM/Banking • All POIs • Spell POI Name The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI)s.
Page 350 Uconnect® 8.4AN — If Equipped 349 You can also change your POI search area, by pressing the “Change Search Area” button on the touchscreen. You will have the following options to change your search area: • Around Me • In a City •...
Page 351 350 Uconnect® 8.4AN — If Equipped POI — Gas Stations To select a Gas Station POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
Page 352 Uconnect® 8.4AN — If Equipped 351 If you are currently on a route guidance and you select a gas station, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination •...
Page 353 352 Uconnect® 8.4AN — If Equipped 2. Press the “Restaurants” button on the touchscreen. You can search for a restaurants by the following categories, which are button tabs at the top of the screen. • Name • Distance • Type...
Page 354 Uconnect® 8.4AN — If Equipped 353 3. Press the desired Restaurant and press “Yes” to con- POI — Hotels/Motels firm the destination. To select a Hotel or Motel POI, follow these steps: If you are currently on a route guidance and you select a 1.
Page 355 354 Uconnect® 8.4AN — If Equipped • Type 2. Press the “Hotels/Motels” button on the touchscreen. • ABC (Search) 3. Press the desired hotel or motel and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a...
Page 356 Uconnect® 8.4AN — If Equipped 355 POI — ATM/Banking To select a ATM or Bank POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
Page 357 356 Uconnect® 8.4AN — If Equipped 3. Press the desired ATM or Bank and press “Yes” to All POIs confirm the destination. To select a POI type, follow these steps: If you are currently on a route guidance and you select an 1.
Page 358 Uconnect® 8.4AN — If Equipped 357 • Automotive 2. Press “All POIs” button on the touchscreen. • Coffee Shops • Community • Entertainment • Gas Stations • Health and Beauty • Highway Exit • Hospital • Hotels/Motels • Other • Parking •...
Page 359 358 Uconnect® 8.4AN — If Equipped If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow”...
Page 360 Uconnect® 8.4AN — If Equipped 359 2. Press the “Spell Name” button on the touchscreen. 3. A keyboard will appear on the screen. Type in the POI that you want to search and press the “List” button on the touchscreen to display available items.
Page 361 360 Uconnect® 8.4AN — If Equipped If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination NOTE: You can press the “back arrow”...
Page 362 Uconnect® 8.4AN — If Equipped 361 3. To delete a destination from the list, press the “Trash If you are currently on a route guidance and you select a Can Icon” button on the touchscreen. Favorite, the system will ask you to choose one of the following: 4.
Page 363 362 Uconnect® 8.4AN — If Equipped Where To? — Intersection 2. Press the “Spell Intersection” button on the touch- screen. To enter a destination by Intersection, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
Page 364 Uconnect® 8.4AN — If Equipped 363 3. If you press “Spell City,” enter and press the desired 4. Once the correct City and Intersection has been en- city name, followed by the desired street name, then tered, you will be asked to confirm your destination.
Page 365 364 Uconnect® 8.4AN — If Equipped Where To? — Go Home If there is no Home Address entered, press “Yes” to enter it now. To enter your Home Address, follow these steps: 2. To set your set your Home Address choose one of the 1.
Page 366 Uconnect® 8.4AN — If Equipped 365 Once you have generated your Home Address, you will 3. Press “Clear Home” and then press “Yes” to clear/ be asked to Save it. delete your Home Address. 3. Press the “Save” button on the touchscreen to confirm 4.
Page 367 366 Uconnect® 8.4AN — If Equipped 2. Press the “Trips” button on the touchscreen. 3. Press the button on the touchscreen with the name of the desired Trip and press the first destination in the list. 4. Confirm the route by pressing “Yes” to start the route...
Page 368 Uconnect® 8.4AN — If Equipped 367 • City Center To add a Trip, follow these steps: • Closest Cities 1. Press the “Create new Trip” button on the touchscreen. • Phone Number 2. Type in the new Trip Name. NOTE: Refer to the individual section of the chosen 3.
Page 369 368 Uconnect® 8.4AN — If Equipped The following Options are available for each trip: • Edit Name • Move Up in the list • Move Down in the list NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X”...
Page 370 Uconnect® 8.4AN — If Equipped 369 5. Press “OK” to confirm the destination. 6. Press the “Yes” button on the touchscreen to confirm your destination and begin your route. If you are currently on a route guidance and you select a...
Page 371 370 Uconnect® 8.4AN — If Equipped Where To? — Point on Map 2. Use the touchscreen to drag the center of the cross over the desired destination. To enter a destination by Point on Map, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
Page 372 Uconnect® 8.4AN — If Equipped 371 4. Press the “Yes” button on the touchscreen to confirm Where To? — City Center your destination and begin your route. To enter a destination by City Center, follow these steps: If you are currently on a route guidance and you select a 1.
Page 373 372 Uconnect® 8.4AN — If Equipped 2. Enter the name of the City you would like to route to. 4. Press the “Yes” button on the touchscreen to confirm your destination and begin your route. If you are currently on a route guidance and you select a...
Page 374 Uconnect® 8.4AN — If Equipped 373 Where To? — Closest City 2. Press the desired city from the list. To enter a destination by Closest City, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
Page 375 374 Uconnect® 8.4AN — If Equipped If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination •...
Page 376 Uconnect® 8.4AN — If Equipped 375 Where To? — Phone 2. Enter the Phone Number of the destination you would like to route to. To enter a destination by Phone number, follow these steps: 3. Press the desired destination from the list.
Page 377 376 Uconnect® 8.4AN — If Equipped Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings. • Options – Press the “Options” button on the touch- screen to display a list of options to alter your route.
Page 378 Uconnect® 8.4AN — If Equipped 377 • Save – Press the “Save” button on the touchscreen to save the destination as a Favorite. Press the “Yes” button on the touchscreen to confirm your destination and to start your route guidance.
Page 379 378 Uconnect® 8.4AN — If Equipped Zoom In +/Zoom Out – Press the “Zoom In (+) or Zoom Out (–)” buttons on the touchscreen to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels.
Page 380 Uconnect® 8.4AN — If Equipped 379 • Settings Turn List (only during route guidance) Press the area in the upper center part of the screen that Press this button on the touchscreen to view all the displays your next turn to see a Turn List for your current available settings.
Page 381 380 Uconnect® 8.4AN — If Equipped Where Am I? Press the area in the lower center part of the screen that displays your current location to view the Where Am I? view. Where Am I? displays the address and GEO Coordinates of your current location.
Page 382 Uconnect® 8.4AN — If Equipped 381 View Map — Settings The following Map Settings are available: Map Setup Press this button on the touchscreen to display items to customize how your map is viewed. Settings – Map Setup for more information.
Page 383 382 Uconnect® 8.4AN — If Equipped Press this button on the touchscreen to change the GPS display. Press the desired button on the touchscreen. • Decimal • DMS • DM Settings — Map Setup With the Map displayed, press the “Options” button on the touchscreen, then press the “Settings”...
Page 384 Uconnect® 8.4AN — If Equipped 383 • 3D (3D Map View Is Only Available On Uconnect Destination Information 8.4AN. Must Select 3D City Models Or 3D Landmarks Press this button on the touchscreen to change the For 3D Map View To Display.) Destination Information that is displayed in the upper •...
Page 385 384 Uconnect® 8.4AN — If Equipped • Near while in Map View. Press and release the desired selec- tion button on the touchscreen until a check-mark ap- • Off pears, showing the setting has been selected. Vehicle Icon TMC Incidents – If Equipped...
Page 386 Uconnect® 8.4AN — If Equipped 385 3D City Models (Available On The Uconnect 8.4AN) Park Areas Press this button on the touchscreen to display 3D city Press this button on the touchscreen to display Park models while in Map View. Press and release the button Areas while in Map View.
Page 387 386 Uconnect® 8.4AN — If Equipped River Names The following Guidance options are available. • Play Voice Guidance Prompts Press this button on the touchscreen to display River Names while in Map View. Press and release the button Press this button on the touchscreen to enable Voice on the touchscreen until a check-mark appears, showing Guidance Prompts during route guidance.
Page 388 Uconnect® 8.4AN — If Equipped 387 • Junction View Automatic By Delay Time Press this button on the touchscreen to enable Junction Manual View during route guidance. Press and release the button on the touchscreen until a check-mark appears, showing the setting has been selected.
Page 389 388 Uconnect® 8.4AN — If Equipped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Information From the Nav Main Menu, press the “Information”...
Page 390 Uconnect® 8.4AN — If Equipped 389 Information — Where Am I? 2. Press the “Where Am I?” button on the touchscreen. To select “Where Am I?” information, follow these steps: 1. While in the Nav Main Menu, press the “Information”...
Page 391 390 Uconnect® 8.4AN — If Equipped 3. Press the “GPS” button on the touchscreen to view the GPS information. 4. Press the “Save” button on the touchscreen to save the location in your Favorites. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X”...
Page 392 Uconnect® 8.4AN — If Equipped 391 • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the ‘X’...
Page 393 392 Uconnect® 8.4AN — If Equipped • Fire Department – Search and route a Fire Department Press the “Save” button on the touchscreen to save your close to your current location current location in Favorites. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X”...
Page 394 Uconnect® 8.4AN — If Equipped 393 2. Press the “Hospital” button on the touchscreen. You can search for a Hospital by the following catego- ries, which are button tabs at the top of the screen. • Name • Distance • ABC (Search)
Page 395 394 Uconnect® 8.4AN — If Equipped NOTE: In case of emergency, please contact the facility to Emergency — Police verify their availability before proceeding. To search for a Police Station close to your current location, follow these steps: 3. Press the desired Hospital and press “Yes” to confirm the destination.
Page 396 Uconnect® 8.4AN — If Equipped 395 2. Press the “Police” button on the touchscreen. NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Police Station and press “Yes” to confirm the destination.
Page 397 396 Uconnect® 8.4AN — If Equipped Emergency — Fire Department 2. Press the “Fire Department” button on the touch- screen. To search for a Fire Departmentclose to your current location, follow these steps: 1. While in the Nav Main Menu, press the “Emergency”...
Page 398 Uconnect® 8.4AN — If Equipped 397 You can search for a Fire Department by the following NOTE: You can press the “back arrow” button on the categories, which are button tabs at the top of the touchscreen to return to the previous screen or the “X”...
Page 399 398 Uconnect® 8.4AN — If Equipped 2. Or, visit DriveUconnect.com and follow these steps: travel time along your route. Since the service is inte- • Under the “Help & Support” tab, select your vehicle grated with a vehicle’s navigation system, SiriusXM Traffic can help drivers pick the fastest route based on brand.
Page 400 Uconnect® 8.4AN — If Equipped 399 • Movie Listings — Check local movie theatres and SiriusXM TRAVEL LINK — U.S. MARKET ONLY (AVAILABLE ON 8.4AN — IF EQUIPPED) listings in your area and route to the theater of your choice.
Page 401 400 Uconnect® 8.4AN — If Equipped SECURITY FEATURES To provide Uconnect® Services to you, we may record and monitor your conversations with Roadside Assis- The following Security Related options are available: tance, Uconnect® Care or Vehicle Care, whether such • 9–1–1 Call conversations are initiated through the Uconnect®...
Page 402 Uconnect® 8.4AN — If Equipped 401 9–1–1 Call Operating Instructions 3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit 1. Push the “9-1-1 Call” button on the Rearview Mirror; the following important vehicle information to a 9-1-1...
Page 403 402 Uconnect® 8.4AN — If Equipped NOTE: Once a connection is made between the vehicle’s 6. If a connection between the vehicle and a 9-1-1 opera- 9-1-1 Call system and the 9-1-1 operator, the 9-1-1 opera- tor is made, the 9-1-1 Call system may transmit certain...
Page 404 Uconnect® 8.4AN — If Equipped 403 9-1-1 Call System Limitations WARNING! Vehicles sold in Canada and Mexico DO NOT have 9-1-1 If anyone in the vehicle could be in danger (e.g., Call system capabilities. fire or smoke is visible, dangerous road conditions...
Page 405 404 Uconnect® 8.4AN — If Equipped Even if the 9-1-1 Call system is fully functional, factors WARNING! beyond Chrysler Group LLC’s control may prevent or • Ignoring the Rearview Mirror light could mean you stop 9-1-1 Call system operation. These include, but are not limited to, the following factors: may not have 9-1-1 Call capability if needed.
Page 406 Uconnect® 8.4AN — If Equipped 405 • Operator error by the 9-1-1 operator. WARNING! • Wireless network congestion. Failure to perform scheduled maintenance and • Weather. regularly inspect your vehicle may result in ve- hicle damage and/or serious injury. • Buildings, structures, geographic terrain, or tunnels.
Page 408 ▫ Introducing Uconnect® ....408 ▫ Uconnect® Access* ....417 ▫...
Page 409 Start using Uconnect® Voice Recognition with these Get Started helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 1. Visit UconnectPhone.com to check mobile device 8.4A or 8.4AN systems. and feature compatibility and to find phone pairing instructions.
Page 410 VR or Phone button and saying a Voice Command from current category. All you need to control your Uconnect® system with your voice are the buttons on your steering wheel. 1 — Press To Begin Radio, Media, Navigation, Apps And Climate Functions 2 —...
Page 411 410 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Press the VR button . After the beep, say • Cancel to stop a current voice session •...
Page 412 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 411 • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.” The system will provide you with a list of commands.
Page 413 412 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Media TIP: Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice Uconnect® offers connections via USB, SD, Bluetooth® Command must match exactly how the artist, album, and auxiliary ports.
Page 414 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 413 Climate Too hot? Too cold? Adjust vehicle temperatures hands- free and keep everyone comfortable while you keep moving ahead. (If vehicle is equipped with climate control.) Press the VR button . After the beep, say one of the following commands •...
Page 415 (Navigation is optional on the Uconnect® 8.4A system. See your dealer to activate navigation at any time.) 1. To enter a destination, press the VR button .
Page 416 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 415 Phone TIP: When providing a Voice Command, press the Phone button and say “Call,” then pronounce the name Making and answering hands-free phone calls is easy exactly as it appears in your phone book. When a with Uconnect®.
Page 417 Phone button . After the beep, say... “Reply” Where are you? later. directions. 2. Listen to the Uconnect® prompts. After the beep, I’m on my way. Are you there repeat one of the pre-defined messages and follow the yet? I’m lost.
Page 418 Remote Door Lock/Unlock An included trial and/or subscription is required to take Stolen Vehicle Assistance advantage of the Uconnect® Access services in the next Remote Vehicle Start** section of this guide. To register with Uconnect® Access, press the + MORE button on the 6.5-inch touchscreen to Remote Horn and Lights get started.
Page 419 418 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS Register 1. Press the Apps button on the bottom of the touch- screen. 2. If a pop-up message appears, press Register or go to the Favorite Apps menu and press Uconnect® Regis- tration.
Page 420 2. Listen to the prompt. After the beep, dictate the Apple® or Android® mobile devices. All you need to do message you would like to send. Wait for Uconnect® to process your message. 1. After registering with Uconnect® Access, log on to your Mopar®...
Page 421 420 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 3. The Uconnect® system will repeat your message and YELP® provide a variety of options to add to, delete, send or Once registered with Uconnect® Access, you can use hear the message again. After the beep, tell Uconnect®...
Page 422 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS 421 TIP: Once you perform a search, you can reorganize the SiriusXM Travel Link™ results by selecting either the Best Match, Rating or Need to find a gas station, view local movie listings, Distance tab on the top of the touchscreen display.
Page 423 422 Uconnect® 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS TIP: Traffic alerts are not accessible with Voice Com- Additional Information mand. © 2014 Chrysler Group LLC. All rights reserved. Mopar® and Uconnect® are registered trademarks and Mopar Owner Connect is a trademark of Chrysler Group LLC.
Page 424 SAFETY GUIDELINES CONTENTS SAFETY GUIDELINES ....424...
Page 425 Uconnect® features and applications in this ve- to a level that still allows you to hear outside traffic hicle. Only use Uconnect® when it is safe to do so. and emergency vehicles. Failure to do so may result in an accident involv- ing serious injury or death.
Page 426 SAFETY GUIDELINES 425 • Permanent hearing loss may occur if you play your • Do not spray any liquid or caustic chemicals directly music or the system at loud volumes. Exercise caution on the screen! Use a clean and dry micro fiber lens when setting the volume on your system.
Page 427 426 SAFETY GUIDELINES FCC Declaration If this equipment does cause harmful interference to radio or television reception, which can be determined by This device complies with Part 15 of the FCC Rules and turning the equipment off and on, the user is encouraged with Industry Canada license-exempt RSS standard(s).
Page 428 SAFETY GUIDELINES 427 Safety Information The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy Exposure to Radio Frequency Radiation emitted is far less than the electromagnetic energy emit- The radiated output power of the this internal wireless ted by wireless devices such as mobile phones.
Page 429 15UC84A-526-AD Fourth Edition Uconnect 8.4A/8.4AN ® Chrysler Group LLC Printed in the USA...

This manual is also suitable for:

8.4an

Uconnect 8.4A Owner's Manual Supplement

Quick Links

Related Manuals for Uconnect 8.4A

Summary of Contents for Uconnect 8.4A

This manual is also suitable for:

Table of Contents