Using The Yealink Exp50 Color-Screen Expansion Module; Using The Line Key - Yealink EXP50 User Manual

Using the Yealink EXP50 Color-screen Expansion
Module
The use of Ext keys on the EXP50 color-screen expansion module and DSS keys on the IP phone
are almost the same. For more information on using DSS keys on the IP phone, refer to
phone-specific user guide
This chapter provides you the following operating instructions for the EXP50 color-screen
expansion module. Topics include:

Using the Line Key


Using the Busy Lamp Field

Resetting the Yealink EXP50 Color-screen Expansion Module

Using the Line Key
You can configure line keys to associate with a line for the connected EXP50 color-screen
expansion module. Incoming calls to the line can be distributed evenly among the available line
keys both on the host phone and the connected EXP50 color-screen expansion module. Each
line key on the connected EXP50 color-screen expansion module can only handle one call. For
more information on configuring an Ext key as the line key, refer to
You can use a line key to do the following:
Placing a call

Answering a call

Placing an active call on hold

Resuming a held call

To place a call using the line key:
Press the line key on the EXP50 color-screen expansion module, the host phone will enter
1.
the pre-dialing screen.
Enter the desired number using the keypad on the host phone.
2.
Press
3.
For more information on placing a call, refer to the
phone-specific user guide

Using the Yealink EXP50 Color-screen Expansion Module

.
, or the Send soft key on the host phone.
.
Line on page 26.
Placing Calls Yealink
section of
Yealink
61