Yealink EXP50 User Manual page 26

Yealink EXP50 User Guide
This field appears only if Screensaver Type is set to Custom.
The custom picture appears in Screensaver list. You can only delete the custom picture by
clicking Del when the desired custom picture is selected in the Screensaver field.
To upload a custom picture from USB flash drive via phone user interface:
Press Menu->USB Record->Browse Photo.
1.
Press
2.
Press the Preview soft key.
3.
Press the Set as soft key, and then select Set as screensaver.
4.
Press the OK soft key to accept the change.
5.
Note
Before uploading the custom picture from the USB flash drive, please make sure that the USB
flash drive has been connected successfully, and
USB flash drive and not stored in a specific folder.
18
or , or the Switch soft key to select the desired picture.
the picture is stored in the root folder on the