Yealink EXP50 User Manual page 24

Yealink EXP50 User Guide
To add the custom picture from a USB flash drive via phone user interface:
Press Menu->Record->Browse Photo.
1.
Press
2.
Press the Preview soft key.
3.
Press the Set as soft key, and then select Set as EXP wallpaper.
4.
Press the OK soft key to accept the change.
5.
The EXP wallpaper will change to the corresponding picture.
Note Before uploading the custom picture from the USB flash drive, please make sure that the USB
flash drive has been connected to
stored in the root folder on the USB flash drive and not stored in a specific folder.
Wallpaper for expansion modules is configurable via web user interface at the path
Settings->Preference.
color-screen
Note The EXP50
size of the custom wallpaper doesn't meet the IP phone screen size, the wallpaper will be
stretched or zoomed out according to the screen size.
For more information on wallpaper, refer to the
user guide
.
The screen saver will automatically start when the IP phone is idle for the preset waiting time.
The screen saver is used to blank the screen or fill it with moving images or patterns. If you
connect a color-screen expansion module EXP50 to the IP phone, the screensaver will start or
stop on the phone and EXP50 synchronously.
16
or , or the Switch soft key to select the desired picture.
expansion module EXP50
expansion module screen size is 4.3 inches (Resolution: 272x480). If the
successfully, and the picture is
Wallpaper Yealink phone-specific
section of