Enabling The Power Saving Via Web User Interface; Configuring The Office Hour Via Web User Interface - Yealink EXP50 User Manual

Yealink EXP50 User Guide
There is an incoming call.

A new prompt (e.g., missed call, new voice mail or forwarded call) on the host phone.

The status of BLF key changes.

You can configure the following power-saving settings:
Office Hour

Idle Timeout (minutes)

The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
Power saving is configurable via web user interface only.
Note
Enabling the Power Saving
To enable the power saving feature via web user interface:
Click on Settings->Power Saving.
1.
Select Enabled from the pull-down list of Power Saving.
2.
Click Confirm to accept the change.
3.
Configuring the Office Hour
Office Hour specifies the starting time and ending time in the office each day.
20