10.1.7 How to Remove the Fan motor
Step 1:
The chassis is held by the installation
plate and two snap-fit designs. Hold out
against the A and B with two index fingers,
and pull it away from the installation plate
along the direction indicated in right
image about 25 degree.
Step 2:
Disconnect the copper pipe to remove
the unit from wall. Remove the panel,
filter, electric cover, display box ,louver,
electric control box and frame part
according to the previous steps.
Step 3:
Unfold the Pipe clamp
B along the direction indicated in right
image.
locker
A and
Service Manual - SVH 09/12/18/24 Series
64