Service Manual - SVH 09/12/18/24 Series
Remark:
Use a multimeter to test the DC voltage
between 2 port and 3 port of outdoor unit.
The red pin of multimeter connects with 2
port while the black pin is for 3 port.
When AC is running normally, the
voltage will move alternately between
-25V to 25V.
If the outdoor unit has malfunction, the
voltage will move alternately with
positive value.
While if the indoor unit has malfunction,
the voltage will be a certain value.
Remark:
Use a multimeter to test the resistance
of the reactor which does not connect
with capacitor.
The normal value should be around
zero ohms. Otherwise, the reactor is
malfunctioning.
35
31