Skyjack SJIII 3220 Operating & Maintenance Manual page 5

DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER
AUTHORIZATION AND TRAINING. DEATH OR SERIOUS
INJURY COULD RESULT FROM IMPROPER USE OF THIS
SERVICE POLICY AND WARRANTY
SKYJACK, Inc. warrants each new SJIII Series work platform to be free of defective parts and workmanship for the
first 12 months. Any defective part will be replaced or repaired by your local SKYJACK dealer at no charge for
parts or labor. Refer to Warranty Statement for extentions or exclusions.
SKYJACK, Inc. is continuously improving and expanding product features on it's equipment: therefore, specifications
and dimensions are subject to change without notice.
The Safety Alert Symbol identifies important safety messages on machines, safety signs, in manuals, or elsewhere.
When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety
message.
SCOPE OF THIS MANUAL
This manual applies to the ANSI/SIA, CSA and CE versions of the SJIII Series work platform models listed on page
3. Equipment identified with "ANSI/SIA" meets the ANSI/SIA-A92.6 standards. Equipment identified with "CSA"
meets the CAN3-B354.2&.3-M82 standards. Equipment identified with "CE" meets the requirements for the European
countries, i.e. Machinery Directive 89/392/EEC and EMC Directive 89/336/EEC and the corresponding EN standards.
SJIII Series - The CONVENTIONALS
EQUIPMENT!
NOTE
This Safety Alert Symbol Means Attention!
Become Alert! Your Safety Is Involved.
Complete Revision 99-05-01
Page iii