Vega VEGAPULS 66 Operating Instructions Manual page 41

Service - Adjustment unit
Service - Language
VEGAPULS 66 • 4 ... 20 mA/HART - two-wire
6 Set up with the display and adjustment module PLICSCOM
Menu item
Medium
Vessel form
Damping
Linearisation
Sensor-TAG
Displayed value
Extended settings
Current output - characteristics
Current output - max. current
Current output - min. current
Current output - failure
Unit of measurement
The values of the following menu items are not reset to the reset
values (see table) with "Reset":
Menu item
Backlight
Language
SIL
HART mode
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
7)
Peak value indicator
The min. and max. distance values are reset to the actual value.
In this menu item you select the internal arithmetic unit of the sensor.
Unit of measurement
m(d)
The sensor is already set to the ordered national language. In this
menu item you can change the language. The following languages are
available, e.g. in software version 3.50:
•
Deutsch
•
English
•
Français
•
Espanõl
•
Pycckuu
Special parameters are parameters which are set customer-specifically on
7)
the service level with the adjustment software PACTware.
Reset value
Liquid
not known
0 s
Linear
Sensor
Distance
None
4 ... 20 mA
20 mA
4 mA
< 3.6 mA
m(d)
Reset value
No reset
No reset
No reset
No reset
41