Vega VEGAPULS 66 Operating Instructions Manual page 16

4 Mounting
Inflowing medium
Mounting socket
16
Fig. 6: Vessel with conical bottom
Do not mount the instruments in or above the filling stream. Make sure
that you detect the product surface, not the inflowing product.
Fig. 7: Inflowing liquid
The socket piece should be dimensioned in such a way that the an-
tenna end protrudes at least 10 mm (0.4 in) out of the socket.
VEGAPULS 66 • 4 ... 20 mA/HART - two-wire