Vega VEGAPULS 66 Operating Instructions Manual page 17

4...20 ma/hart - two-wire

Hide thumbs Also See for VEGAPULS 66:

Table of Contents

4 Mounting

Fig. 8: Recommended socket mounting

If the socket height cannot be maintained, an antenna extension will

be necessary. This prevents from false reflections of the socket piece.

Fig. 9: Tube extension

Tip:

VEGAPULS 66 is optionally also available with antenna extension.

The antenna length can thus be selected such that the antenna end

protrudes 10 mm (0.4 in) out of the socket.

Sensor orientation

In liquids, direct the sensor as perpendicular as possible to the prod-

uct surface to an achieve optimum measurement.

Fig. 10: Alignment in liquids

VEGAPULS 66 • 4 ... 20 mA/HART - two-wire

Table of Contents

Vegapuls 62