JLG Skytrak 6036 Operation & Safety Manual page 99

Installation Procedure:
• Refer to "Attachment Installation" on page 5-10.
CRUSH HAZARD. Do not use side tilt to push or pull objects or load. Failure to comply
could cause object or load to fall.
Operation:
• Approach load with forks centered on load and stop telehandler.
• Level telehandler before side tilting carriage to engage load.
• Side tilt carriage to left or right to align forks with load and engage load.
• Raise load slightly and level carriage side to side.
• Travel in accordance with requirements set forth in
Section 1- General Safety Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could damage forks
or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
31211018
WARNING
Section 5- Attachments
5-19