JLG Skytrak 6036 Operation & Safety Manual page 47

1. Park Brake Switch: On/Off switch. See page 3-9 for details.
2. Beacon Light Switch (if equipped): On/Off switch.
3. Hazard Light Switch (if equipped): On/Off switch.
4. Work Light Switch (if equipped): Three position switch. Push bottom of switch to
turn all work lights on. Move switch to middle position to turn on front and boom
worklights. Push top of switch to turn off all work lights.
5. Steer Select Switch: Three positions: 4-wheel circle steer, 4-wheel crab steer and 2-
wheel front steer. See page 3-17 for details.
6. Windshield Wiper Switch (if equipped): Three position switch. Push bottom of
switch to operate wiper at high speed. Move switch to middle position to operate
wiper at low speed. Push top of switch to turn off wiper.
7. Skylight Wiper Switch (if equipped): Three position switch. Push bottom of switch to
operate wiper at high speed. Move switch to middle position to operate wiper at low
speed. Push top of switch to turn off wiper.
8. Windshield and Skylight Washer Switch (if equipped): Push and hold bottom of
switch to activate washer.
9. High Exhaust System Temperature Indicator (HEST) (if equipped for ULS/85 or
110HP): May illuminate during exhaust system cleaning. See page 4-4 for details.
10. Selective Catalytic Reduction (SCR) Indicator (if equipped for ULS/85 or 110HP):
Illuminates when stationary cleaning is required. Flashes during cleaning process.
See page 4-4 for details.
11. Do Not Turn Off Engine Indicator (if equipped for ULS/85 or 110HP): Illuminates
when stationary cleaning required. See page 4-4 for details.
12. Instrument Cluster: See page 3-6 for details.
Heater and Air Conditioning Controls (if equipped)
13. HVAC Fan Speed (if equipped): Adjustable rotary switch.
14. HVAC Temperature Control Switch (if equipped): Adjustable rotary switch.
15. Air Conditioning (AC) Switch (if equipped): Two-position switch.
31211018
Section 3- Controls and Indicators
3-5