JLG Skytrak 6036 Operation & Safety Manual page 113

Installation Procedure:
• Ensure carriage is properly installed. Refer to "Attachment Installation" on page 5-10.
• Secure the fork mounted hook to the forks by sliding the fork mounted hook onto the
parent forks and install the retaining pin behind the vertical shank of the fork.
Operation:
• Pallet or lumber forks of an appropriate load rating must be used. Do not use with
cubing or block forks.
• Fork mounted hook and rigging weight must be included as part of total load being
lifted.
• Do not use with mast carriage attachment.
• Do not use fork mounted hook with attachments capable of rotating (i.e. side tilt and
swing carriages) without disabling the rotation feature(s).
31211018
Section 5- Attachments
5-33