Installation Procedure:
• Ensure carriage is properly installed. Refer to "Attachment Installation" on page 5-10.
• Secure the fork mounted platform to the forks by sliding the fork mounted platform
onto the parent forks and install the retaining pin behind the vertical shank of the fork.
Preparation and Setup:
1. Ensure the telehandler is on a firm surface and is level.
2. Engage the park brake. Blocking the wheels is also recommended.
3. Level the platform, both side to side (frame level) and front to back (attachment tilt).
4. Keep area under platform free from personnel.
5. When personnel are on platform, the operator must remain seated in cab with
personnel in direct line of sight.
6. DO NOT lift or carry persons in a bucket or on forks.
FALL HAZARD. Never tilt the platform forward, rearward, or level the machine when
the platform is occupied.
31211018
WARNING
Section 5- Attachments
5-47