JLG Skytrak 6036 Operation & Safety Manual page 109

Installation Procedure:
• Ensure carriage is properly installed. Refer to "Attachment Installation" on page 5-10.
• Ensure length and cross section of the parent fork arm is equal to or exceeds the
parent fork arm blade length stamped into the fork extension.
• Secure the fork extensions to the forks by sliding the fork extensions onto the parent
forks and install the retaining pin behind the vertical shank of the fork.
Operation:
• Heavy part of load must be against carriage backrest.
• Do not allow load center of gravity to be in front of tip of the supporting fork.
• Do not pick up a load or pry materials with tip of fork extensions.
31211018
Section 5- Attachments
5-29