JLG Skytrak 6036 Operation & Safety Manual page 45

1. Transmission Control Lever: See page 3-10.
2. Dash Controls and Indicators: See page 3-4.
3. Steering Wheel: Turning the steering wheel to the left or right steers the machine in
the corresponding direction. Three steering modes are available. See "Steer Modes"
on page 3-17.
4. Horn: Press to sound horn.
5. Accessory Control Lever (if equipped): See page 3-16.
6. Boom Joystick: See page 3-12.
7. Frame Level Joystick: See page 3-14.
8. Auxiliary Hydraulic Joystick: See page 3-13.
9. Outrigger Switches (10042 & 10054): See page 3-15.
10. Accelerator Pedal: Pressing down the pedal increases engine and hydraulic speed.
11. Service Brake Pedal: The further the pedal is depressed, the slower the travel speed.
(6042, 8042, 10042 & 10054 Only) With service brake pedal depressed and boom
angles above 40°, the locked mode of the Stabil-Trak system is activated. See
page 3-18.
12. Ignition Switch: Key activated. See page 3-8.
13. Frame Level Indicator: Enables operator to determine the left to right level condition
of the telehandler.
31211018
Section 3- Controls and Indicators
3-3