Conversion Summary; Procedure - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
3.1.1.1.1

Conversion summary

3.1.1.2

Procedure

Commissioning
All applications Switch.../3.1 or 3.2 (SA/S x.16.y.1 with or without current

detection) are mutually convertible.
The applications Switch...CS/2.0 (SA/S x.16.5S with current detection!)

are permissible as a source.
The application Switch 12f 16C/2.0 (SA/S 12.16.5 12-fold device without

current detection) is not possible as a source.
The general rules covering conversion apply (parameters in the source

device, which do not exist in the target device, are ignored. Parameters
in the target device, which do not exist in the source device, receive their
default value).
Import the current VD3 file into ETS3 and add a product with the current

application program to the project.
After you have parameterized a device, you can transfer the settings to a

second device.
Right click on the product and select Convert.

Subsequently, the required settings are undertaken in the dialog.

Finally, exchange the physical address and delete the old device.

Should you wish to only copy individual channels within a device, use the
function Copy and exchange, page 49.
SA/S | 2CDC 505 056 D0207 49