Parameter Window A: Current Detection - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
3.2.5.1.4 Parameter window
A: Current Detection
Commissioning
In this parameter window, all settings for the function Current Detection are
undertaken.
This parameter is visible if in parameter window
parameter Enable function "current detection" has been enabled.
Note
The function current detection and the respective parameter window are
only visible with the Switch Actuators with current detection (SA/S
x.16.6.1). They are both equally available in the Switch Actuator and
Heating Actuator modes.
As the function for the modes does not differ, refer to the descriptions of
the parameter setting options and adjustable communication objects from
parameter window
A: Current
Function, page 117, the
A:
Detection, page 94.
SA/S | 2CDC 505 056 D0207 125