Parameter Window A: Preset - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
3.2.3.1.2 Parameter window
A: Preset
Commissioning
In this parameter window, preset settings can be made.
This parameter is visible if in parameter window
parameter Function Preset has been enabled.
What is a preset?
The presets are used to retrieve a parameterised switch value, e.g. in
order to implement light scenes. In addition, the output value that is
currently set can be saved as a new preset value.
The preset values can be set (stored) via the bus. In parameter
window A: General you define whether the values set in the ETS are
transferred in a download to the Switch Actuator. The values saved in
the actuator are overwritten in this way.
Two presets are available per output. Preset 1 is sent by a telegram
with the value 1, Preset 2 is sent with a telegram with the value 0.
Separate communication objects are available for recalling and for
saving / setting of a preset.
Preset telegrams continue to be executed with the parameterised
function Staircase lighting. The function Staircase lighting is triggered
by a preset recall (ON telegram).
Function, page 64, the
A:
SA/S | 2CDC 505 056 D0207 79