Current Display - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
4.1.5

Current display

138 2CDC 505 056 D0207 | SA/S
Planning and application
The Switch Actuators with current detection are no current measurement
devices.
The recognised current with its tolerances (see
be displayed.
Using the KNX, this current value can be sent to a complex maintenance
centre or a simple LCD display, e.g. a panel. Further processing or display is
possible. Hereby, real-time monitoring or facility management of the
installation is possible.
E
Electrical loads
Technical
SA/S 4.16.6.1
data, page 7), can
LCD display