Advantech MIO-6300 User Manual page 60

 Write to I2C Device
– Insert the specified slave address and command. For more details of these,
please refer to Slave address and Command.
– Insert the data to be written in text box Input Data, notes for text box Input
Data and text box Write Length please see the details in (2) and (3) of section
Notices for the inputs.
– Click Write button for write/send operation.
– The write result will be shown in the Result text box.
Write/Read Combined

– Insert the specified slave address and command. For more detail of these,
please refer to Slave address and Command.
– You can either read or write data, or read and write data at the same time in
this operation; therefore, either the data for read or write should be provided.
For reading, read length should be provided. For writing, input data should be
provided. Notes for text box Input Data and text box Write Length please see
the details in (2) and (3) of Notices for the inputs.
– Click WR Combined button to do the Read/Write combined operations.
– The read/write result will be shown in the Result text box.
*Notices for the inputs of I2C page:
1. Needed value should be provided; Gray text box indicates that it does not need
an input value and the text box will be not be editable.
2. Text box Write Length will automatically count the length of the data inserted in
the Input Data text box.
3. Text box Input Data allows inputs of characters [0-9], [a-f], [A-F] and space only.
When you are inserting multiple bytes, add a space to let the program know that
you are going to insert the next byte data.
MIO-6300 User Manual 50