Advertisement
Setting Up a Mitel SX-200 Digital PIMG Integration with Cisco Unity Connection
Transfer Types
Supervised transfer
Setting Up the Digital Mitel PIMG Units
Do the following procedures to set up the digital Mitel PIMG units that are connected to the Mitel SX-200
phone system.
These procedures require that the following tasks have already been completed:
• The phone system is connected to the digital Mitel PIMG units using digital lines.
• The PIMG units are ready to be connected to the LAN or WAN.
• The PIMG units are connected to a power source.
Fields that are not mentioned in the following procedures must keep their default values. For the default values
of all fields, see the manufacturer documentation for the PIMG units.
Downloading the PIMG Firmware Update Files for Digital Mitel PIMG Units
http://software.cisco.com/download/navigator.html?mdfid=280082558&i=rm.
Usage
Program the user station to forward calls to the pilot number only when the call is not
answered (on the phone system, the number of rings before forwarding must be more
than the number of rings to supervise the call). Confirm that call forwarding is disabled
when the extension is busy.
PIMG Integration Guide for Cisco Unity Connection Release 11.X
Setting Up the Digital Mitel PIMG Units
9
Advertisement
