Advertisement
Setting Up the Digital Mitel PIMG Units
Field
Frames Per Packet
Fax
Fax IP-Transport Mode
SRTP
SRTP Preference
MKI on Transmit Stream
Key Derivation Enable
Key Derivation Rate
Anti-replay Window Size Hint
Cipher Mode
Authentication Type
Authentication Tag Length
1 Select Submit.
2 On the Configuration menu, select VoIP > QOS.
3 On the VoIP QOS Configuration page, enter the following settings.
Table 26: VoIP QOS Configurative Page Settings
Field
Call Control QOS Byte
RTP QOS Byte
1 Select Submit.
2 On the Configuration menu, select IP.
PIMG Integration Guide for Cisco Unity Connection Release 11.X
24
Setting Up a Mitel SX-200 Digital PIMG Integration with Cisco Unity Connection
Settings
Select the applicable setting:
• G.711—1
• G.729AB—2
Failure to use the correct setting results in recorded
messages containing nothing but silence.
Select RTP Only.
Select Yes.
Select Yes.
Enter 16.
Enter 64.
Select AES_Counter_Mode.
Select SHA1.
Select SHA1_80_bit.
Settings
Enter 104.
Enter 184.
Advertisement
