Advertisement
Setting Up a Mitel SX-200 Digital PIMG Integration with Cisco Unity Connection
Field
Password
1 Select OK.
1 On the System menu, select Password.
2 On the Change Password page, enter the following settings.
Table 9: Change Password Page Settings
Field
Old Password
New Password
Confirm Password
1 Select Change.
2 On the Configuration menu, select Routing Table.
3 On the Routing Table page, under Router Configuration, select VoIP Host Groups.
4 Under VoIP Host Groups, enter the following settings for the first VoIP Host Group.
Table 10: First VoIP Host Group Settings
Field
Name
Load-Balanced
Fault-Tolerant
1 For Unity Connection without a cluster, under Host List, enter the host name or IP address of the Unity
Connection server and the server port in the format <host name or IP address>:5060.
For Unity Connection with a cluster configured, under Host List, enter the host name or IP address of the
subscriber server (the second Unity Connection server that you installed) and the server port in the format
<host name or IP address>:5060.
Setting
Enter IpodAdmin.
Setting
Enter IpodAdmin. (This setting is case sensitive.)
Enter your new password. (This setting is case sensitive.)
Enter your new password. (This setting is case sensitive.)
Settings
Accept the default or enter another descriptive name of the VoIP host group.
(Unity Connection without a cluster) Select False.
(Unity Connection with a cluster configured) Select False.
(Unity Connection without a cluster) Select False.
(Unity Connection with a cluster configured) Select True.
PIMG Integration Guide for Cisco Unity Connection Release 11.X
Setting Up the Digital Mitel PIMG Units
13
Advertisement
