Setting Up a Mitel SX-200 Digital PIMG Integration with Cisco Unity Connection
1 Under Inbound VoIP Rules, select Add Rule.
2 Under Inbound VoIP Rules, enter the following settings for the second new inbound VoIP rule.
Table 17: Second New Inbound VoIP Rule Settings (Outbound Calls)
Field
Enable
Rule Label
Request Type
Originating VoIP Host
Address
1 Under Inbound VoIP Request Matching, enter the following settings.
The rule that you created in
rule.
Table 18: Inbound VoIP Request Matching Settings
Field
Calling Number
Calling Name
Called Number
Called Name
Redirect Number
Redirect Name
1 Under Outbound Routes, enter the following settings.
The rule that you created in
rule.
Settings
Check this check box.
Enter Outbound_UC_Calls or another name.
This inbound VoIP rule handles all outbound calls from Unity Connection.
Select Call.
Enter *.
Step 48
must be selected. Otherwise, any changes you make apply to another
Settings
Enter *.
Enter *.
Enter *.
Enter *.
Enter *.
Enter *.
Step 48
must be selected. Otherwise, any changes you make apply to another
PIMG Integration Guide for Cisco Unity Connection Release 11.X
Setting Up the Digital Mitel PIMG Units
17