Validity And Liability - KEB COMBIVERT F5 Instruction Manual

Step 3
Non-observance of the safety and operating instructions leads to the loss of any liability
claims. The warnings and safety instructions in this manual work only supplementary. This
list is not exhaustive.
1.3

Validity and liability

The use of our units in the target products is beyond of our control and therefore exclu-
sively the responsibility of the machine manufacturer, system integrator or customer.
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibil-
ity. This also applies to any violation of industrial property rights of a third-party.
Selection of our units in view of their suitability for the intended use must be done generally
by the user.
Tests can only be done within the application by the machine manufacturer. They must
be repeated, even if only parts of hardware, software or the unit adjustment are mod-
ified.
Danger
The suspension of liability is also valid especially for operation interruption damages, loss of
profit, data loss or other damages. The disclaimer will void the warranty. This is also valid, if
we referred first to the possibility of such damages.
If individual regulations should be futile, not effective or impracticable, then the effectivity of
all other regulations or agreements is not affected by this.
Through multitude applications not each possible case of installation, operation or mainte-
nance can be considered. If you require further information or if special problems arise which
are not treated in detail in the documentation, you can request the required information from
the local agency of the company Karl E.Brinkmann GmbH.
The entire documentation associated with the device will be displayed, in-
cluding the instruction manuals in German and English. If available, other
translations are also indicated. Make sure that the user understands the pro-
vided language.
Should you be unable to read or understand the documentation, do not
take any further steps. Please inform our support network for further
assistance.
by tamper from unauthorized personnel
Unauthorised opening and tampering may lead to death, bodily injury, prop-
erty damage and malfunctions. Modification or repair is permitted only by
KEB authorized personnel. Infringement will annul the liability for resulting
consequences.
Preface
5