Installing The Appliance - Miele CS 1326 Operating And Installation Instructions

Installing the appliance

^ Feed the power cord down through
the cut-out.
^ Then place the front side of the
appliance in the countertop cut-out.
^ Then with a hand on each side of the
appliance press down evenly on the
edges until it clicks into position.
When doing so make sure that the
appliance seal sits tightly on the
countertop to ensure it is sealed
correctly. Do not permanently seal
into the countertop.
^ Connect the appliance to the main
power supply.
^ Turn the appliance on and check the
function.
The appliance can be lifted out
using a special tool.
The appliance can also be pushed
up and out from underneath. Note
that the rear will need to be pushed
out first.
Installation
27