Installing The Appliance - Miele CS 1134 Operating And Installation Instructions

^ Feed the connection cable down
through the cut-out.
^ Then drop the front edge of the
appliance into the cut-out.
^ Using both hands, press down
evenly on the sides of the hob until it
clicks into position. When doing this
make sure that the seal under the
hob sits flush with the worktop on all
sides. This is important to ensure an
effective seal all round. Do not use
sealant.
^ Connect the hob to the mains (see
"Electrical connection").
^ Check that the hob works.
Once installed, the hob can only be
lifted out using a special tool.
It can also be pushed up out of the
cut-out from below. It must be
pushed up from the back first.

Installing the appliance

41