Table of Contents
Advertisement
OPERATION
TRUN ON/OFF THE UNIT
Press PWR button (1) to turn on the unit. When
the unit is on. Press and hold PWR button (1) for
2 seconds to turn the unit off.
SOUND ADJUSTMENT
Press SEL button (1) shortly to select the
desired adjustment mode. The adjustment
mode will change in the following order:
BAS→TRE→BAL→LOUD→EQ→LOC→ST→VOL→N1
6 0606
BAS: bass
TRE: treble
BAL: balance
FAD: fader
EQ: equalization
LOUD: loudness
LOC: local
STEREO: stereo
VOL: volume
N16 0606: MCU version
In each item, by rotating the audio knob (1)
it is possible to adjust the desired sound
quality.
LOUDNESS
In LOUD item you can turn it on/off by
rotating the audio knob (1).
EQ function
In EQ item you can select the preset EQ
mode by rotating the audio knob (1) as
below.
CLASS- ROCK-POP-FLAT-EQ OFF
LOC on/off
In LOC item rotating the audio knob (1) to
turn on/off local function. In LOC ON mode
the
unit
will
reduce
sensitivity when you search station. That
means you can receive the station that
sound is good. It will ignores the station
that sound is not good. In LOC OFF mode it
will increase the receiving sensitivity when
you search the station. That means you
the
receiving
6
can receive more stations.
STEREO/MONO function
In STEREO item rotating the audio knob
(1) to choose STEREO or MONO mode.
In STEREO mode you can receive FM
stereo signal. In MONO mode the stereo
station will be switched to monochrome.
Sometimes when the signal is not good.
Changing it to MONO mode will reduce
the noise.
LIQUID CRYSTAL DISPLAY (LCD)
The liquid crystal display (LCD) displays
the
frequency,
functions.
ALARM ON/OFF
Press ALARM ON/OFF button (5) to turn
on/off alarm function.
SEEING ALARM TIME
Short press ALARM SET button (4) to see
the alarm time.
SETTING THE ALARM
To set the alarm, press and hold the
ALARM SET button (4) for 2seconds. The
number representing the hours will flash.
Rotating the VOL control (1) to adjust the
hour. Press ALARM SET again briefly and
the number representing the minutes will
flash. Rotating the VOL control (1) to
adjust the minutes. Press the ALARM
SET button (4) again to store the alarm
time.
Once a time is set, press ALARM
ON/OFF (5) to turn the alarm function on
or off.
STOP THE ALARM OUTPUT
When time ran to the alarm time. The
head unit will output the alarm sound.
Pressing ALARM ON/OFF button (5) to
stop the alarm output.
time
and
activated
Advertisement
Table of Contents
