Table of Contents
Advertisement
OPERATION
TURNING THE UNIT ON/OFF
Turning on the Player
After all connections are completed. correctly,
Press power button to turn on the unit. When
the unit is on, it will search the disc
automatically. If there is a disc in the disc slot,
the unit will start playback automatically.
Turning off the Player
When the unit is on. Press power button
the unit off.
Loading a Disc
Insert the disc into the disc slot with the printed side
facing up, The player will play the disc automatically.
Removing a Disc
Press
eject button to eject the disc.
BASIC PLAY Stopping
Playback
- Shortly press
button one time to stop the
unit playback. Press
the disc. and go back to the
Pausing Play
Pressing.
on the remote control
on the front panel during playback will stop
playback temporarily. To return to
normal playback, press
DV D/V CD/SV CD, press
on the remote control again to stop at the next
picture (step function). If you play a
CD/MP3/Picture CD, pressing on the
remote control again is ineffective.
Rapid Forward / Rapid Reverse
Repeatedly press and hold
seconds during playback. It will be changed
according to the disc as follows:
X2---x4---x8---x20---play
to turn
button to playback
DVD LOGO
. If you play a
/
for 2
Slow Motion Playback (For DVD Only)
Press "SLOW"button on the remote control
during play.
Each time the button is pressed, the speed of
slow forward/reverse changes according to the
disc as follows.
DVD:
In slow motion state, press ENTER or
on the remote control or
panel to recover normal playback.
Skipping Track
Press
to skip to the next track, and
Press
to skip to the previous track.
Note:
For some VCD2.0 discs (PBC-playback
control)
/
unavailable.
SOUND ADJUSTMENT
Press SEL button shortly to select the desired
adjustment mode. The adjustment mode will
change in the following order:
→ VOL → BAS → TRE →BAL → FAD ---
(volume) (bass)
By pressing the volume button to adjust
the desired sound quality.
Volume Level Adjustment
Pressing VOL+/- button on the remote control to
increase or decrease the volume level.
DVD VIDEO MENU PLAY
When playing a DVD disc in the DVD player:
1) The disc will be played automatically and
stop at menu picture.
2) Use
cursor buttons on the remote
control to move between the highlight bars
in the menu.
3) Press ENTER button on the remote control
to confirm the selected item.
9
on the front
buttons maybe
(treble) (balance) (fader)
Advertisement
Table of Contents
