SPECIFICATION DESCRIPTION OF CONTROLS ON FRONT CONTROL PANEL GENERAL Supply Voltage DC 12V. Negative Ground Current Consumption Max.7.5A Power Output 4x80 320W Number of channels 2 STEREO channels. LOUD Unit Dimensions 178[W] X 98[D] X 50[H] mm. FM SECTION Frequency range 87.5MHz -107.9MHz Effective sensitivity 3uV.
DESCRIPTION OF BUTTONS ON REMOTE CONTROL 1. POWER button WIRES CONNECTION 2. A.P button RCA OUTPUT WHITE 3. SCN(SCAN) button FRONT LEFT SPEAKER JACK POWER RCA OUTPUT 4. CLK(CLOCK) button FRONT RIGHT SPEAKER JACK BT ANTENNA 5. MODE button 6. BND(BAND) button 7.
Common operation: INSTALLATION METHOD . To turn the unit on/off . When the unit is power Off, it may be switched On by pressing any button except This is an anti-theft installation method. The main unit wears a METAL MOUNTING SLEEVE. RELEASE button.
6. To display and adjust clock 4) Press and hold CLEAR button to cancel all numbers entered if necessary. Press CLK button briefly to display time for 5 seconds on the display, and then returns to its previous display unless the button is pressed again. 5) Briefly press TEL to start dialling.
Page 6
8. To play tracks in random 3. To store current station or turn on a preset one During playback, press RDM button briefly to play all tracks in random. Press it again 1) Press one of the 6 number buttons and hold for more than 1 second to store the to cancel RDM function.