Table of Contents
Advertisement
INSTALLATION
Notes:
-
Choose the mounting location where the
unit will not interfere with the normal driving
function of the driver.
Before finally installing the unit, connect the
wiring temporarily and make sure it is all
connected up properly and the unit and the
system work properly.
Use only the parts included with the unit to
ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult
with
installation requires the drilling of holes or
other modifications of the vehicle.
Install the unit where it does not get in the
driver's
way
passenger if there is an emergency stop.
If
installation
horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would be
subject to high temperature, such as from
direct sunlight, or from hot air, from the
heater, or where it would be subject to dust,
dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from
"Front" (conventional DIN Front-mount) or
"Rear" (DIN Rear-mount
installation, utilizing threaded screw holes at the
sides of the unit chassis). For details, refer to
the following illustrated installation methods.
Installation Opening
This unit can be installed in any
dashboard having an opening as shown below:
your
nearest
dealer
and
cannot
injure
angel
exceeds
30°from
3 0
ATTENTIONS OF INSTALLATION
1. This player should be installed by
professional technician.
2. Please read the instruction and operation
of equipment carefully before installing.
3. Make sure to connect other wires before
power connection.
4. To avoid short circuit. Please make sure
all the exposed wire are insulating.
5. Please fix all the wires after installation.
6. Please make connection to the player
if
accordingly to this instruction manual. Wrong
connection may cause damage.
7. This player only fit for 12V DC device and
please make sure your car belongs to this kind
the
of cathode grounding electrical system.
8. Please connect the wires rightly. Wrong
connection will cause malfunction or damage
the electrical system.
2
Advertisement
Table of Contents
