Table of Contents
Advertisement
OPERATION
BRIGHTNESS OF THE LCD
Press the DIM button (6) to adjust the
LCD brightness from "DIMMER
1" (brightest) to "DIMMER 2"(less bright)
CLOCK DISPLAY
Press DISP button (17) to display the
time.
Each displaying time is several seconds,
and come back to current position after
several seconds.
CLOCK SETUP
Press and hold the DISP button (16) for 2
seconds to access Clock Setup mode.
The number representing the hours will
flash. Rotating the VOL control (1) to
adjust the hour. Press DISP again briefly
and the number representing the minutes
will flash. Rotating the VOL control (1) to
adjust the minutes. Press the DISP button
again to exit clock setup mode.
SPEAKER OUTPUT
The three speaker output buttons (7)
(SPEAKER
A,
SPEAKER C) control speaker output.
Press any of the three buttons to turn up
or down the corresponding speaker
output.
AUXILIARY INPUT FUNCTION
Press the MODE button (15) to access
auxiliary input mode (AUX). The unit can
be connected to a portable audio player
through the AUX IN jack (22) or the
Audio/Video Inputs on the back of the unit.
RESET FUNCTION
RESET button (24) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
-
Initial installation of the unit when all
wiring is completed.
-
All the function buttons do not operate.
-
Error symbol on the display.
SPEAKER
B
and
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MODE button (15) to select
radio mode, the radio mode appears in
the display together with the memory
band and frequency.
SELECTING
BAND
At radio mode, press BAND button (14)
shortly to select the desired band.
The reception band will change in the
following order:
→FM1→ FM2→ FM3→ WB→ AM1 → AM2→
Noted: Press and hold BAND button
for 2 seconds will directly skip to the
WB.
SELECTING STATION
Press button
(18) shortly to activate automatic seek
function. It will search up/down a
station automatically. Press for 2
seconds until "MANUAL" appears on
the display, the manual tuning mode is
selected. In this mode you can turn
up/down a step frequency one by one
till searched a station. If both buttons
have not been pressed for 5 seconds,
it will return to seek tuning mode and
"AUTO" appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (16) for 2
seconds, the radio searches from the
87.5 MHz frequency and checks the
signal strength until one cycle search
is finished. And then some strong
stations
corresponding preset number button.
In the first cycle it will in LOCAL
mode to receive the stronger station.
If it is less than 18 pcs station it will
7
THE
FREQUENCY
(19) or
are
stored
into
button
the
Advertisement
Table of Contents
