Table of Contents
Advertisement
4.9 Wireless LAN Configuration
Your wireless LAN can be configured as follows:
Using the stylus, tap the Network icon
not connected to a wireless network, the Network icon should have a red X on it.
The following screen will appear (names of the available networks may differ). Highlight the
proper wireless network, input appropriate network key information and check the "Enable IEEE
802.1x authentification for this network" radio box
To further configure the wireless network, tap the Advanced button.
Note: When the wireless network is properly connected, the Network icon will change to reflect
the connected status.
4.10 Programmable Button
The VisionPlate includes a Programmable button, which is located just under the Power button.
This button can be programmed to launch applications or run custom programs. The Hitachi team
is available for programming and customization services as well as development support and
assistance. Please contact your Authorized Hitachi Representative for more information.
on the task bar Notification area. If the VisionPlate is
Hitachi VisionPlate User Manual
51
Advertisement
Table of Contents
