Low Battery Notification Settings - Hitachi VisionPlate User Manual

4.6 Low Battery Notification Settings

Your VisionPlate will display a message to notify you when your battery level is low.
The notification method can be changed by doing the following:
1. Using the stylus, tap the Start menu then tap Control Panel. The Control Panel window will
open.
2. Double-tap the Power Option icon.
3. Tap the Alarm tab. The following menu will appear:
4. There are four user-selectable methods of notification, as follows:
Sound Alarm: The VisionPlate will beep when the battery level is low. To enable this mode,
check the Sound alarm box.
Display Message: The VisionPlate will display a popup message notifying you of the low battery
condition. This is the default setting for the VisionPlate. To enable this mode, check the Display
message box.
Sound Alarm and Display Message: To enable this mode, check the Sound alarm and Display
message boxes.
Do nothing: Uncheck the Sound alarm and Display message boxes.
5. Tap OK.
Chapter
46 4